Jump to content
SAU Community

Recommended Posts

hey guys got a r32 gtst. 1993 model second owner in aus

car has alot of good parts on it.

rb20 stock with 130 thousand ks on it healthy strong motor with gearbox computer turbo loom and a twin plate clutch worth $$$ after 1500 for it all.

gtr genuine bonnet 500$

Gtr genuine grill 150$

Gtr fiberglass bar 300$

Gtr boot and spolier 250$

coil-overs 400 think there Hks there purple?

Nismo cat back exhaust 400$

inter-cooler kit not sure what brand 300$

carbon fibar front guards 150$ each ( wider then gtr )

doors 170$ each

cradle with lsd diff 400$

rear bar 100$

and what ever else you need tex me and ill give you a price.

located in melbourne 0401 906 086

post-58084-0-35136500-1373794121_thumb.jpg

post-58084-0-00313500-1373794153_thumb.jpg

post-58084-0-65557400-1373794163_thumb.jpg

post-58084-0-97929400-1373794341_thumb.jpg

front guard, coilovers, front grill, rear boot and spolier, rear bar , center dash , glove box, tail shaft, indicators ALL SOLD !!!!!!!!!!! still got motor, box, gtr bonnet, gtr front bar, nismo exhaust cat back, full intercooler, doors, front lights, seats, and most of the interior.

IF SOME 1 HAS A DAMAGED R32 AND NEEDS A CUT WILL SELL WHAT YOU NEED :)

still got a fair bit interior left !!!! also got a rb20 with 130ks very healthy with 5speed gearbox and twin plate clutch comes with computer wiring and turbo FULL COMPLETE RUNNING GEAR 1450

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...