Jump to content
SAU Community

Recommended Posts

Hi all,

I'm in the process of clearing out all my spare parts from owning 3 GTR's!

Prices are negotiable! If I haven't provided photos they are available on request!

- R32 GTR Front subframe

$200

- R32 GTR Rear cradle - at this stage I want to try and sell it complete - literally a bolt up and drive away affair - subframe, diff, shafts, hubs, handbrake assembly, stock control arms etc

$500 (I'm taking a stab in the dark at price for this)

- R32 GTR front and rear factory swaybars

$150 for both

- R32 GTR RB26 sump with diff

$150

-R32 GTR Bonnet - straight but looks like it's been sanded back and painted by a 3 year old. Also has holes for N1 bonnet lip.

$300

- R32 GTR alloy guards - again these are straight but will require stripping and repainting

$150 both

- R32 GTR heater core

$75?

- R32 GTR front reo

$150

- R32 GTR rear reo

$100?

- R32 GTR prop shaft

$50

All parts located in Mawson Lakes, Adelaide. Would prefer to sell the heavy things locally, unless buyer wants to arrange freight.

I also have a bunch of other R32 GTR parts that I haven't sorted yet because I need to get rid of everything above to make room to sort it out!!

Best form of contact is 0405329361 otherwise PM on here.

Cheers,

Jon

P.S. Someone should buy this too http://www.skylinesaustralia.com/forums/topic/424997-fs-r32-gtr-rolling-shell/#entry6846019

post-13041-0-49668500-1375418073_thumb.jpg

post-13041-0-98401500-1375418150_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/429619-fs-r32-gtr-parts-adelaide/
Share on other sites

  • 2 weeks later...

I do...although the one sitting in my garage I am holding to put into my street car. The one in my street car has a slight bubble on the far passenger side, maybe 2-3 inches in length which will be for sale.

UPDATE

- R32 GTR Front subframe

$200

- R32 GTR Rear cradle - at this stage I want to try and sell it complete - literally a bolt up and drive away affair - subframe, diff, shafts, hubs, handbrake assembly, stock control arms etc

$500 (I'm taking a stab in the dark at price for this)

- R32 GTR front and rear factory swaybars

$150 for both

- R32 GTR RB26 sump with diff

$150

-R32 GTR Bonnet - straight but looks like it's been sanded back and painted by a 3 year old. Also has holes for N1 bonnet lip.

$300

- R32 GTR alloy guards - again these are straight but will require stripping and repainting

$150 both

- R32 GTR heater core

$75?

- R32 GTR front reo

$150

- R32 GTR rear reo

$100?

- R32 GTR prop shaft

$50

- R32 GTR steering rack, good used condition

$200

All prices negotiable

post-13041-0-04975500-1376486275_thumb.jpg

post-13041-0-14951500-1376486320_thumb.jpg

post-13041-0-02121300-1376486384_thumb.jpg

post-13041-0-51264100-1376486509_thumb.jpg

post-13041-0-64893300-1376486655_thumb.jpg

Edited by big JON
  • 2 weeks later...

UPDATE

- R32 GTR Front subframe

$200 $150

- R32 GTR Rear cradle - at this stage I want to try and sell it complete - literally a bolt up and drive away affair - subframe, diff, shafts, hubs, handbrake assembly, stock control arms etc

$500 (I'm taking a stab in the dark at price for this)

- R32 GTR front and rear factory swaybars

$150 for both

- R32 GTR RB26 sump with diff

$150 $100

-R32 GTR Bonnet - straight but looks like it's been sanded back and painted by a 3 year old. Also has holes for N1 bonnet lip.

$300

- R32 GTR alloy guards - again these are straight but will require stripping and repainting

$150 both

- R32 GTR heater core

$75?

- R32 GTR front reo

$150

- R32 GTR rear reo

$100?

- R32 GTR prop shaft

$50

- R32 GTR steering rack, good used condition

$200 $150

All prices negotiable

UPDATE

R32 GTR Rear cradle - at this stage I want to try and sell it complete - literally a bolt up and drive away affair - subframe, diff, shafts, hubs, handbrake assembly, stock control arms etc

$500 (I'm taking a stab in the dark at price for this)

- R32 GTR front and rear factory swaybars

$150 for both

- R32 GTR Bonnet - straight but looks like it's been sanded back and painted by a 3 year old. Also has holes for N1 bonnet lip.

$300

- R32 GTR alloy guards - again these are straight but will require stripping and repainting

$150 both

- R32 GTR heater core

$75?

STUFF THAT HASN'T SOLD

- R32 GTR aftermarket front pipes. 2.5" intake into 3"

$300

- R32 GTR Front subframe

$150

- R32 GTR steering rack, good used condition

$150

R32 GTR RB26 sump with diff

$100

- R32 GTR front reo

$100

- R32 GTR rear reo

$75

- R32 GTR prop shaft

$40

- R32 GT

- R32 GTR boot with wing, painted in primer, no lock

$150

- R32 GTR front grille, also in primer

$100

- R32 GTR accelerator pedal and cable

$40

- R32 GTR steering column, ignition barrel, boot lock and door locks keyed alike

$200

- R32 GTR glove box

$50

- R32 GTR under steering wheel interior plastic with fuse panel

$20

- R32 GTR steering column surround

$40

- R32 GTR dash panel facia

$20

- R32 GTR centre console panel radio surround

$50

- R32 GTR centre console

$50

- R32 GTR parcel shelf

$50

- R32 GTR sill scuff panels (right and left)

$40 each or $70 the pair

- R32 GTR kick panels (left and right)

$25 each or $40 the pair

- R32 GTR rear quarter interior trim panels

$100 the pair

- R32 GTR under carpet air vent

$40

- R32 GTR complete carpet in reasonable condition

$100

- R32 GTR roof lining, dirty but otherwise good condition

$30

R32 GTR interior map light

$20

- R32 GTR jesus handles

$20

- R32 GTR boot trim (missing RHS section)

$50 the lot

- R32 GTR ECU lucky dip

$100

- R32 GTR

  • 4 weeks later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...