Jump to content
SAU Community

Recommended Posts

With the SAU 2012 Nats fast approaching and the car coming together.

I decided to do some general maintenance and check over the car.

Changed the oil and decided to flush the radiator when I came across this!

(This also could have happened earlier in the year but for the sake of the timeline lets chuck it in here)

kQ4TLaD.jpg?2

TirZOj5.jpg?1

Ended up going to Nat Rad in Canberra and asking their opinion.

One of the jap websites sold a replacement for about $90 but I didn't have that cash for a small pipe nor the time.

Nat Rad ended up finding a bit of pipe sitting and around and gave it to me for $5.00

I smashed it in with a hammer and its holding together to this date!

B1DPw6Z.jpg?1

Decided to also clear up my headlights.

So many different options on how to go about this and I chose one and just dived in!

Metal Polish! AMAZING!

Before

u6NzX6G.jpg?1

After

2imXrKM.jpg?1

I think the results speaks for itself!

Around this time as well I noticed my rims were scrubbing on the guards a little bit.

So I purchased myself a heat gun, hammer and time haha

Not many photos of this but here is one that I could dig up.

It doesn't show much but you can kind of make out that I folded the inner lip up.

This was enough to give the rims clearance.

vnIuge5.jpg?1

Those rims look heeeeaps better, interesting read

$500 to change a rwd clutch, wow shits dear down there, the clutch in my 32 GTR cost that and that was a clutch shop, I had to do it 5 time in 3 years but that's a different story

Haha $500 is the backyard price with no receipt!

Its around $750-$1000 if you want it done by a workshop.

Thankfully I have found a bloke that knows what he is talking about and takes his time to do it right

You kents should make this the SAU NSW Mini Nats -

http://www.skylinesaustralia.com/forums/topic/429450-s-a-u-n-s-w-sydney-motor-sport-park-track-day/

Its NSW members only entry for the first month so get on it!

The day of the week kills me!
Can't do anything mid week in my position.

I have to do weekend track days.

But I have been checking out Wakefield and you can get on the track some weekends for only $150

You can travel down again and rip some skids

if there are track days there where you can crack some skids for $150 let me know - cheapest i have found is 200- 250

enjoying this read :)

I have to do weekend track days.

But I have been checking out Wakefield and you can get on the track some weekends for only $150

You can travel down again and rip some skids

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...