Jump to content
SAU Community

Recommended Posts

hey guys i thought this thread might be a good idea for some of us to post in.

basically i thought it would help if we put up places where we have seen speed cameras that we may not expect them or we rarely see them, so we can be carefull around certain areas we may have thought we'd be ok to have a blast in.

(note not speeding would be the best bet, but for most of us with the cars we have, the temptation is to great)

i guess i'll start, on drakeford drive heading out towards issabella plains i got busted by a cop car hiding in the bushes with a radar gun, i was doing about 150k in my lancer last yr and all of a sudden i saw them, i jammed on the brakes but only slowed down to 125 b4 they saw me, so they were well hidden as i only slowed down 25k with the brakes jammed on. they chased me down and kicked my ass heavily.

also there has been a speed van once or twice on the turn onto namatjira from hindmarsh dr. its a very random spot but if u hammer through the corner then u'll be almost certainly done.

feel free to add guys, i hope those 2 helped.

Yeah mate, good plan. I've recently moved back to my olds after breaking up with my girl, and have seen a speed van at the bottom of Kerrigan street in Fraser/Charnwood just before it goes into Dunlop (near Shakespeare Cres entrance) almost every morning on the way to work. You can really hammer down that street. Before the chicanes got put in, used to be able to get airborne!!

they park them on maribyrnong ave in kaleen a lot down near one of the primary schools. i've been caught by it once by surprise, i was only going 69 in a 60.

but at night i see them always parked behind signs on the side of the road trying to look inconspicuous. isn't there a law or something that says they have to be visable to a certain extent? hiding behind signs or in bushes is hardly visable

well, if any of u live in the Kambah area, be careful on Livingston Avenue (the one that goes past the Kambah Pizza/Takeaway place)....

I go that way cos it's quicker than Athlon when there's lot's of traffic, and it joins Sulwood at the top...but the white van has been there a few times :P

Coming home from the city, I was going down the Parkway, I hit the straight stretch from just past the zoo to the Curtin turn-off, and just past that turnoff in the bush was the gold/purple ford cop car. He has perfect veiw of over a kilometre of straight road. That twice now he has been there at bout 11pm onward on a weeknight.

Luckily I was in my daily driver, [suzuki sierra] and was just cruising on the limit, becuase you dont notice him until your smack infront of him, even with your highbeams on, with the angle of the incline its difficult.

If you're taking the backroad that goes between Lyons & Weston, it's probably not a wise action to come flying up the hill (coming towards Weston)....more often than not, just as I come over the crest of the hill there's a camera van sitting right under the parkway overpass.

Coming home from the city, I was going down the Parkway, I hit the straight stretch from just past the zoo to the Curtin turn-off, and just past that turnoff in the bush was the gold/purple ford cop car. He has perfect veiw of over a kilometre of straight road. That twice now he has been there at bout 11pm onward on a weeknight.

Luckily I was in my daily driver, [suzuki sierra] and was just cruising on the limit, becuase you dont notice him until your smack infront of him, even with your highbeams on, with the angle of the incline its difficult.

that's some good info, i regularly drive north on the parkway to belco at that time, i'll make sure i'm right on 100 as i come to the underpass. sometimes down the hill it sneaks up to 110 - 120 without me noticing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...