Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Gooood morning folks. you know what day it is today? Home day!

V35's don't have a rear wiper. Cause inferior model of skylines etc. :rolleyes:

Does your work have any policies regarding Fatigue etc, particularly with driving?

Not familiar with V35s, that would explain it.

WHS Policy would be a great example :)

Have you seen my brakes? :P

One thing that I don't understand is, you've done so much to yours and it's pulling 285rwkw. Why are the z32 guys then saying that it's easy to pull 300 rwkw from a VG30?

I refer to this: http://www.skylinesaustralia.com/forums/topic/432767-300zx-tt-potential/

One thing that I don't understand is, you've done so much to yours and it's pulling 285rwkw. Why are the z32 guys then saying that it's easy to pull 300 rwkw from a VG30?

I refer to this: http://www.skylinesaustralia.com/forums/topic/432767-300zx-tt-potential/

It can be done easy enough. I have a stock 24year old bottom end so I am only running 17psi. Turbos are good for another 4/5 psi. And they are just the little 2560's ;)

Edited by MagicMikeZ32

Morning Ants. How goes the new additions? Both car and kid?

its good mate. So pleased to have them all at home.

Back at work today, so can't play much with GTR nor spend time with my little one :(

But need money and so does my boss which is totally understandable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...