Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

its good mate. So pleased to have them all at home.

Back at work today, so can't play much with GTR nor spend time with my little one :(

But need money and so does my boss which is totally understandable.

Fair enough! Hopefully you get to spend some more time with them both soon

Ants, double your C/O rate. :D

although it would increase my salary quite attractively I would never be able to be profitable if that ever happened.

But I know where ur comin from ;)

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

long runner Itbs out the bonnet? Aww yis

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

There is only so many ways to skin a cat, who cares if he has some things the same as yours, its bound to happen.

There is only so many ways to skin a cat, who cares if he has some things the same as yours, its bound to happen.

Yer I know, lots of people end up with similar setups. I dunno a dislike of a human can throw reality out the window mr bunts :)

what is it with qld tuners and not being able to tune a car in a timely fashion.

i want pics and results damnit.

It is being done in a timely fassion, Do you know anyone in NSW that can do all the fabrication work on a new engine fitout in under a day as well as source and fit other required goodies? Our initial expectations and timelines were more optimistic than reallity in relation to this project. Still progress is happening and long weekend is now over.

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

Can he afford it, and can he get it done. If not then what's the problem let the dreamer dream.

Can he afford it, and can he get it done. If not then what's the problem let the dreamer dream.

He can't afford them but he'll get them, he's 22 still lives at home and gets his girlfriends to pay for EVERYTHING.

He just ordered a set of 18x13 -28 work Meisters, cost him something like 4k :O

.... Mayb he sells drugs

He can't afford them but he'll get them, he's 22 still lives at home and gets his girlfriends to pay for EVERYTHING.

He just ordered a set of 18x13 -28 work Meisters, cost him something like 4k :O

.... Mayb he sells drugs

Steal his rim's...sell them buy your gear.

He can't afford them but he'll get them, he's 22 still lives at home and gets his girlfriends to pay for EVERYTHING.

He just ordered a set of 18x13 -28 work Meisters, cost him something like 4k :O

.... Mayb he sells drugs

What car is this in/on?

It is being done in a timely fassion, Do you know anyone in NSW that can do all the fabrication work on a new engine fitout in under a day as well as source and fit other required goodies? Our initial expectations and timelines were more optimistic than reallity in relation to this project. Still progress is happening and long weekend is now over.

i was under the impression the fab work was all done, and just awaiting a tune?

So one of my "mates" has decided he now wants itbs... Looks like I won't be going down that path, f**k he's an asshole, as soon as he finds out something's going to be better then something he has he shoots out and buys it.

f**king sad little wanker

Look at it the other way. You can do a better job and show him up/

It is being done in a timely fassion, Do you know anyone in NSW that can do all the fabrication work on a new engine fitout in under a day as well as source and fit other required goodies? Our initial expectations and timelines were more optimistic than reallity in relation to this project. Still progress is happening and long weekend is now over.

Can he afford it, and can he get it done. If not then what's the problem let the dreamer dream.

some people just like to stir shit and make it seem as though there's an issue.

Good things take time.

He can't afford them but he'll get them, he's 22 still lives at home and gets his girlfriends to pay for EVERYTHING.

He just ordered a set of 18x13 -28 work Meisters, cost him something like 4k :O

.... Mayb he sells drugs

lame. Beats my 18x13-6's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...