Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

no man I don't. Cuz I live on the GC and not western Brisvegas

R I c. I miss mt nebo :( havent even really had a good fang around tambo either since I have moved close (2years) lol

R I c. I miss mt nebo :( havent even really had a good fang around tambo either since I have moved close (2years) lol

yeah Mt Tambo is a nice drive but is heavily monitored theses days and wayyyy to many accidents which does not help :(

 

 

seriously it was sitting at lights when it happen didn't even boost it cause car was still cold.... so from that video you would look for a split ic piping ect?

Sounds very air leaky to me. After looking for air leaks unplug each coil pack. If the idle doesn't change you have found your problem cylinder. Did you say you unplugged the afm and it made no difference? I have had a failed afm and failed wiring to my afm cause issues similar to yours. My money is still on air leak though.
  • Like 1

How hard is a slappa RB30 ?

I now have a metal on metal ticking sound :angry:

I'm thinking I have lost 1 or maybe 2 cylinders, comp test next.

While pulling out the coil packs when running made the car want to stall on all, some didn't change much when plugging back in but did make a change..

PowerFC install stops the car hunting but as the car warmed up and idled dropped it wanted to stall causing it to hunt.

Anyone got a engine crane?

Sounds very air leaky to me. After looking for air leaks unplug each coil pack. If the idle doesn't change you have found your problem cylinder. Did you say you unplugged the afm and it made no difference? I have had a failed afm and failed wiring to my afm cause issues similar to yours. My money is still on air leak though.

Yeah unplugged AFM then started car on stock ECU ran the same harder to start but did run

PowerFC installed to rules out ecu. Am unplugged wouldn't run. AFM installed it runs but missing..

Did the spray carbie cleaner around hoses and intake gasket.. no notable change..

Who can recommend a Mechanic Southside close to beenleigh ? If only ERD was open still.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi. Hoping someone can maybe tell me if the same R34 cable works on R33 coup? Or tell me how I can fix mine. It broke the same way 1" away from the eye. Blessing
    • Robertson was a Canadian inventor, and it absolutely reigns supreme here. 95% of our screws are Roberston. It's literally the only option you can buy off store shelves. What would it have lost out too? I believe it's also very popular in the US.  My reference to imperial was pointed to both NPT and BSP. 
    • No. BSP lost to the cultural/technical imperialism of living next to Trumpistan. Face it, Robertson screws were better and still pretty much lost out to the yank stuff. The Europeans hate the Brits and they don't use NPT. NPT is just as "imperial" as BSP is, being based on those useless inch thingos. Just done differently. 
    • I live in Quebec. Our license plate slogan is "Je me souviens" Translated is "We will remember" as a reminder to when England conquered us and that we must never forget what they did. Long story short, BSP is unheard of here due to being an English design. I'm surprised our nazi anti english government office the OQLF hasn't kicked in my door yet just talking about it, yet alone imperial anything.       
×
×
  • Create New...