Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Anyone have a magic wand that changes a clutch and timing belt? Not looking forward to this fix haha :P

Did come up with something very dirty to reply but decided best not too haha.

jsut a quick question on the legality of the following

flanged screamer pipe ( so has the ability not to be a screamer piper when the pipe is fitted.

carbon bonnet

carbon boot

jsut a quick question on the legality of the following

flanged screamer pipe ( so has the ability not to be a screamer piper when the pipe is fitted.

carbon bonnet

carbon boot

#1 I presume is legal as long as the screamer isn't fitted on the street.

#2 carbon fibre panels are illegal

:(

second one.

as im new to brissy i have no idea

anyone know of good wheel repair place in the brissy area closer to ipswich the better.

I stress good as the wheels are legit gram light's from way back

Edited by ibrox90

Morning all

Fueling issue is fixed, kinda. I'm getting about 15l/100 but with this cam that's fine :)

lol....I'd be non too impressed if my car drank that much.

Anyone have a magic wand that changes a clutch and timing belt? Not looking forward to this fix haha :P

My clutch too is in need of replacement, Havent tackled that yet. But the timing belt is relatively simple, as long as you have time and some mechanical knowledge......oh and patience...lots of patience. hope that helps :)

3.6 diff gears and a 2800-3000 stall = bad fuel economy :P

Because skids?

Anyone notice that jackwang in the kippa ring thread? - We are going to make these comments publicly available - It's a public forum what a f**king fool. Labeling us as hoons on our own forum when there is no evidence of such boils my blood.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...