Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Who has z32's afm's and how on earth did you attach air filtering equipment to them? there seems to be literally no info about how to go about it.

what filter did you get? The filter must be adaptable to 80mm AF meters or else it will never fit!

Still in the office bro.. :(

mate dafaq goin on?

Gettin up early to goto work, stayin late?????

Ask yourself this..............will all my time and effort be rewarded if so...........in what form?

Do not answer that question Tony. Just think about it.

what filter did you get? The filter must be adaptable to 80mm AF meters or else it will never fit!

None yet. Don't really want to just bolt a filter onto it sucking in hot air though... but its the last ditch option.

I don't think anyone sells elbows that go on the end to move the pods over a bit in the z32 size, or adapter plates. That being said, adapter plates wouldn't actually be that hard to make

The other option is buying a stock airbox, enlarging the holes 15mm and drilling new bolt holes for the AFM's, as they're in stock location they'll still be flush against the airbox (might be issue with flange protruding past the edges of the airbox face though).

Or i could just buy cheap china spec hard pipe+z32 mounting kit for 300 bucks

mate dafaq goin on?

Gettin up early to goto work, stayin late?????

Ask yourself this..............will all my time and effort be rewarded if so...........in what form?

Do not answer that question Tony. Just think about it.

Thanks for the concern mate. There's actually been a lot going on behind the scenes. Few know. Even fewer understand. Just tried calling and then realised the time. Sorry mate!

None yet. Don't really want to just bolt a filter onto it sucking in hot air though... but its the last ditch option.

I don't think anyone sells elbows that go on the end to move the pods over a bit in the z32 size, or adapter plates. That being said, adapter plates wouldn't actually be that hard to make

The other option is buying a stock airbox, enlarging the holes 15mm and drilling new bolt holes for the AFM's, as they're in stock location they'll still be flush against the airbox (might be issue with flange protruding past the edges of the airbox face though).

Or i could just buy cheap china spec hard pipe+z32 mounting kit for 300 bucks

Anything that bolts to an RB25DET AFM should also bolt to a Z32 one I think you'll find

Thanks for the concern mate. There's actually been a lot going on behind the scenes. Few know. Even fewer understand. Just tried calling and then realised the time. Sorry mate!

all good mate. I was just falling asleep as I could here the phone.

Il call you to catch up.

And morning all

  • Like 1

Morning mate. Really dislike hay fever but that's just a minor inconvenience. Today is going to be a very good day.

thats the way. Got a text message from one of my new clients 10mins ago.......my day will again be interesting to say the least.
thats the way. Got a text message from one of my new clients 10mins ago.......my day will again be interesting to say the least.

Love great starts to the day. Sets everything else in motion.

Last week, had to text a candidate at 5:45 because I had an offer for her. Also messaged another girl at the same time with some other awesome news. Good news = good start to morning = good day.

A custom air box with a neat cold air induction goes a long way I think Pete

exactly why I don't want to just bolt up to the afms directly.

in any case,I think I'm just going to have to wait till I get home to figure out what I'm going to do with them

And nope not me on stage with Taylor, I wouldn't say he was lucky as she now thinks he's a pysco. I'd rather be up there as her lead guitarist :/

them drugs Nick................what I tell you bout them drugs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...