Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

We have been pretty happy with the outlander thus far. No off roading yet tho.

Awaits 400 photos of the bogged outlander... Had an uncle try to take his on Fraser that was an interesting day lmao

Small "4wd's" are not for 4wding, most are incapable and just to Danm low

Unless you Usualy have lots of experiance with 4wding you can run into troubles

But I will say. Suzuki's they go hard off road

Anyways I have talked to ants about purchasing some parts and I have found a new direction for my car with the power side of things

This means forged bottom end :D

Interesting definition of 'real 4x4' you have :P

Low range, traction control, ladder frame chassis and same clearance as your navara. And at least it won't get stuck spinning diagonally opposite wheels in the air like yours will :P Edited by Bunta

Oh and stock it is on the low side, but nothing a cheap lift cant fix, and we are not into 'off road' where you go out and find places to get stuck and break shit, we just want a car that can do the fire trails ect.

Anyways I have talked to ants about purchasing some parts and I have found a new direction for my car with the power side of things

This means forged bottom end :D

I like where this is going :)

Morning folks.... Well events yesterday afternoon/night werent what I expected. Got a call from a mate at midday asking if I want to accompany him down to Matty @ Pits to get his car on the dyno just to check the replacement cam he got in is fine. I thought hell why not I finish work at 1:30pm it will be a good drive.

Got there at 3pm and and we got the car onto the dyno..

1_zps671f75e0.jpg

Matty played around with it for a while and fixed up a few things here and there. It came to about 6pm and was doing a few final power runs...

Knock Knock.......... who's there? Spun a bearing in the last 10 mins on dyno...

After many profanities were used Matty ended up dropping us at the train station and we got the train back to Sandgate then got a lift home....

Got home at about 10:30pm and then up again to start work at 5:30am...

Tired Scott is tired..

You went all the way down to see Matty Spry and didn't swing pass to say hi????

I also went to bed late paying for it now :/

Sorry to hear about your mates car Scottie.

What power did it make before she gave way?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Nah, lots of insurance repairs on V36 and V37 for pedestrians deployments. Reasons ranging from possums, to extremely severe potholes have deployed them. However, paying for the full repair can still be upto $5k AU some people have noted!
    • Hi, i got 1998 r34 4 door auto abs model and its manual converted with bigbox when i bought it . I successfully find the neutral and reverse light wire but can’t find the speed signal wires for speedo drive. I know its grey plug but on my loom no grey plug with 2 wires . I opened the loom upto where it getting branch with other wire, i’m amazed they is no wire. So need help how to fix the speedometer problem. I search on google it says some r34 model measure speed from diff sensor. Is it right? I talk to a wrecker he say no this isn’t right, i’m kinda stuck. Please help
    • What!? US law does not apply to the rest of the world!!!
    • No requirement for JDM vehicles,  which the 33 is, maroney label only needed in the US market for new cars I believe (Federal law stuff) Google knows all
    • Hopefully you can just unbolt them, thank them for their service, then bin them and not replace them Apparently the sensors like to set them off with only minor impacts at low speed It looks like they do a delete kit for some of these, but, it is costly 
×
×
  • Create New...