Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

We have been pretty happy with the outlander thus far. No off roading yet tho.

Awaits 400 photos of the bogged outlander... Had an uncle try to take his on Fraser that was an interesting day lmao

Small "4wd's" are not for 4wding, most are incapable and just to Danm low

Unless you Usualy have lots of experiance with 4wding you can run into troubles

But I will say. Suzuki's they go hard off road

Anyways I have talked to ants about purchasing some parts and I have found a new direction for my car with the power side of things

This means forged bottom end :D

Interesting definition of 'real 4x4' you have :P

Low range, traction control, ladder frame chassis and same clearance as your navara. And at least it won't get stuck spinning diagonally opposite wheels in the air like yours will :P Edited by Bunta

Oh and stock it is on the low side, but nothing a cheap lift cant fix, and we are not into 'off road' where you go out and find places to get stuck and break shit, we just want a car that can do the fire trails ect.

Anyways I have talked to ants about purchasing some parts and I have found a new direction for my car with the power side of things

This means forged bottom end :D

I like where this is going :)

Morning folks.... Well events yesterday afternoon/night werent what I expected. Got a call from a mate at midday asking if I want to accompany him down to Matty @ Pits to get his car on the dyno just to check the replacement cam he got in is fine. I thought hell why not I finish work at 1:30pm it will be a good drive.

Got there at 3pm and and we got the car onto the dyno..

1_zps671f75e0.jpg

Matty played around with it for a while and fixed up a few things here and there. It came to about 6pm and was doing a few final power runs...

Knock Knock.......... who's there? Spun a bearing in the last 10 mins on dyno...

After many profanities were used Matty ended up dropping us at the train station and we got the train back to Sandgate then got a lift home....

Got home at about 10:30pm and then up again to start work at 5:30am...

Tired Scott is tired..

You went all the way down to see Matty Spry and didn't swing pass to say hi????

I also went to bed late paying for it now :/

Sorry to hear about your mates car Scottie.

What power did it make before she gave way?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hopefully you can just unbolt them, thank them for their service, then bin them and not replace them Apparently the sensors like to set them off with only minor impacts at low speed It looks like they do a delete kit for some of these, but, it is costly 
    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
×
×
  • Create New...