Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

what was wrong with the kit Grego?

Gary's recommended kit includes the following:

Front Eibach Main Springs

Rear Eibach Main Springs

Rear Eibach Helper/Tender Springs

Colil Over Conversion Kits x 4

Front Bilstein Shocks

Rear Bilstein Shocks

Front stabiliser bar adj

Rear stabiliser bar adj

Caster Kit

Front Camber kit

Rear Camber Kit

Front Bump Stops

Rear Bump Stops

Rear Subframe alignment kit

I'd like to hear your thoughts Grego as I was just about to get the funds organised for the above?

Shocks, springs, sway bars and bump stops are good. Everything else i would be going adjustable arms (you can get adjustable arms with rubber bushes rather than spherical bearings). The sub frame alignment kit http://www.whiteline.com.au/product_detail4.php?part_number=KCA349 why would he recommend that rather than just replacing the 20 year old bushes?

Also what about the diff mounts, rear lower control arm bushes, bushes in the rear hubs/uprights and more i can't think of now. There are a lot of parts he has left out.

Hey scotty, calipers are upside down afterall

20140318_133204_zpsqzataohd.jpg

Yer, thought it was. Ah well ill switch them over next time they need bleeding.. They still work really well

Also, so much zed, so little shed

20140318_181800_zpstpz87gpd.jpg

Holy Zeds Batman...... I like the fact you've got so much love for one type of car. Any chance we will see one of these at the dyno day this weekend or happy laps??

We should have a party at Mikes and see how much of the backyard we can fill with Zeds and Skyrine. If the Zeds win, we but him a beer. If the Skylines win, we put an RB20 in one of his Zeds. :-D

rb20 might at least give more engine room for other mods. May stop the process of taking the engine out of a zed to do an oil change lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • No requirement for JDM vehicles,  which the 33 is, maroney label only needed in the US market for new cars I believe (Federal law stuff) Google knows all
    • Hopefully you can just unbolt them, thank them for their service, then bin them and not replace them Apparently the sensors like to set them off with only minor impacts at low speed It looks like they do a delete kit for some of these, but, it is costly 
    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
×
×
  • Create New...