Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

what was wrong with the kit Grego?

Gary's recommended kit includes the following:

Front Eibach Main Springs

Rear Eibach Main Springs

Rear Eibach Helper/Tender Springs

Colil Over Conversion Kits x 4

Front Bilstein Shocks

Rear Bilstein Shocks

Front stabiliser bar adj

Rear stabiliser bar adj

Caster Kit

Front Camber kit

Rear Camber Kit

Front Bump Stops

Rear Bump Stops

Rear Subframe alignment kit

I'd like to hear your thoughts Grego as I was just about to get the funds organised for the above?

Shocks, springs, sway bars and bump stops are good. Everything else i would be going adjustable arms (you can get adjustable arms with rubber bushes rather than spherical bearings). The sub frame alignment kit http://www.whiteline.com.au/product_detail4.php?part_number=KCA349 why would he recommend that rather than just replacing the 20 year old bushes?

Also what about the diff mounts, rear lower control arm bushes, bushes in the rear hubs/uprights and more i can't think of now. There are a lot of parts he has left out.

Hey scotty, calipers are upside down afterall

20140318_133204_zpsqzataohd.jpg

Yer, thought it was. Ah well ill switch them over next time they need bleeding.. They still work really well

Also, so much zed, so little shed

20140318_181800_zpstpz87gpd.jpg

Holy Zeds Batman...... I like the fact you've got so much love for one type of car. Any chance we will see one of these at the dyno day this weekend or happy laps??

We should have a party at Mikes and see how much of the backyard we can fill with Zeds and Skyrine. If the Zeds win, we but him a beer. If the Skylines win, we put an RB20 in one of his Zeds. :-D

rb20 might at least give more engine room for other mods. May stop the process of taking the engine out of a zed to do an oil change lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
    • Hey mate, really appreciate the help. Have been looking pretty extensively myself and was certain they were retro fitted, but then ended up finding a 4 door with what looks like the same side skirts or at least the closest I’ve seen. The photos from the Offset Kings event at Sunrise 2016. https://fatlace.com/offset-kings-okayama-at-sunrise/
    • Isn't there a PAR engineering gearset that has closer to stock ratios? And they claim they'll do whatever ratios you want.
×
×
  • Create New...