Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Cheers Ants, Couldnt download on the phone, but works on the computer, damn phone!

Looks like a good list Pete. Few things to consider, Link g4s are a good computer and can be had under a grand if you keep an eye out, for the oil pump see if you can get a hold of billet gears to go in the stock pump, cheap and so far totally bomb proof in mine. what manifold is costing over 2k? :0 the Crank trigger kit costs around $700, you will need an ATI balancer too.

Yeah, all parts are still up in the air.

Wolf is only 1200 bucks for the ECU IIRC, the extra cost is for the actual in line ethanol sensor for the flex setup. But ECU is still very much up in the air.

Oil pump gears might be an idea actually.

Manifold for 2K is one of the sexy sexy Fullrace ones. May not end up going down that route of course, but sexy.

Yeah, all parts are still up in the air.

Wolf is only 1200 bucks for the ECU IIRC, the extra cost is for the actual in line ethanol sensor for the flex setup. But ECU is still very much up in the air.

Oil pump gears might be an idea actually.

Manifold for 2K is one of the sexy sexy Fullrace ones. May not end up going down that route of course, but sexy.

Yeah the full race manifolds are porn. Fecking exxy though especially if you end up getting them coated etc. I saw this one the other day which looks pretty good. Local, twin gate set up already coated etc and much cheaper.

http://www.hioctanedirect.com/index.php?main_page=product_info&cPath=89_90&products_id=2447

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Looks great, I hope everything is working well after all that time!
    • Finally back on the ground and once around the block for the first time in 2+ years
    • Ok a solution was found. I had left the factory oil temp sensor in and it was hooked up. My car never had the triple gauges.  Apparently when you delete the factory pressure and leave the temp sensor connected it triggers the oil light on the dashboard. Disconnected the temp sender, no more light.  I still haven't gotten around to look at the diagrams to figure out how/why they are tied together.
×
×
  • Create New...