Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Noel just got 680 hp out of his car today. After crapping his precision turbo afar not making the desired numbers with it he Changed to a MTA 900 and just pissed power. Pretty interesting!

Thought precision were supposed to be ok...

from a reliability point of view no doubt, but the power production part was the most interesting, they had to push hell out of it to nudge 600hp.
what version precision turbo was it Bunts?

from a reliability point of view no doubt, but the power production part was the most interesting, they had to push hell out of it to nudge 600hp.

64/66

Scott made 588 no problems (not on EFI dyno. Will be interested to see what scotts does make on said dyno)...

Definitely think there was something not right about the 6466 Noel got unfortunately. It struggled to make over 600hp then finally seized up on the dyno. Time will tell what i can get out of mine

Definitely think there was something not right about the 6466 Noel got unfortunately. It struggled to make over 600hp then finally seized up on the dyno. Time will tell what i can get out of mine

Simon32 made over 700hp atw using a Precision 6262 Turbo on a standard RB26 using a standard GTR box.

Just sayin

Noel's turbo musta been le f**ked

I've not driven a700hp car but I do know the jump from 450 to 512 I thought was quite a bit then again from 512 to 588.. But it's hard to make an informed call till I've been there really

Then again all setups are different. 700hp in some cars I would be a total different feeling to 700 in another setup

I've not driven a700hp car but I do know the jump from 450 to 512 I thought was quite a bit then again from 512 to 588.. But it's hard to make an informed call till I've been there really

Then again all setups are different. 700hp in some cars I would be a total different feeling to 700 in another setup

700hp on a track car is doable but you want to make damn sure reliability and suspension and transmission is also up to par to cope with that power.

Is Noel's car a GTR?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...