Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Buy expensive cry once, buy cheap cry daily

Honestly, I was. However Someone had this one so I thought why not, 350 bucks.

that being said, i'm dubious of the plazaman ones. The one pictured on their site doesn't look like it'd fit on the mounts.

Probably cools the intake charge and doesn't leak... :P

I think the factory one does that as well.

that being said, i'm dubious of the plazaman ones. The one pictured on their site doesn't look like it'd fit on the mounts.

So calling the phone number on their website and asking them if the GTR intercooler was a bolt up job never crossed your mind?

I think the factory one does that as well.

So calling the phone number on their website and asking them if the GTR intercooler was a bolt up job never crossed your mind?

but isn't the factory FMIC limited to 300rwkw and looses efficiency after that?

So calling the phone number on their website and asking them if the GTR intercooler was a bolt up job never crossed your mind?

I only started worrying about their fit after having issues with this one today. By the time i'd got back in and fnished packing everything up it was after 4, so i figured i'd give them a call in the morning... :yucky:

My Hybrid one does a better job...

Good for you and your car

but isn't the factory FMIC limited to 300rwkw and looses efficiency after that?

If the car doesn't go to the track or drag strip when do you get the chance to use those 300+ killawasps?

  • Like 1

Just out of curiosity, do drag strips allow intercooler sprays?

Straight from the andra manual

4.6.1 Intercoolers

Must be securely mounted with all hoses securely clamped. No restriction,
apart from location, on air-to-air units. Air-to-liquid are limited to water
and/or water ice ONLY and must be sealed to prevent fluid dropping
on to track surface. Dry ice permitted on its own but housing must be
vented to atmosphere to prevent pressurizing of system. Intercoolers
must be located outside of the driver’s compartment or contained in a
commercially manufactured ballistic containment device and fitted with
a relief valve / burst panel vented outside the driver’s compartment to the
atmosphere.
  • Like 1

Good for you and your car

If the car doesn't go to the track or drag strip when do you get the chance to use those 300+ killawasps?

I try to use it every time I drive the GTR.

It's fairly easy to do especially those long M1 on-ramps we have here on the GC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...