Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Spent 2 days on the o2 sensors.

$100 on specialty tools and a few skinned knuckles later, I have 1 o2 out FML.

Avoided engine out tho :P

Not engine out??? But I don't understand... :blink::P

Not great no, but it wasn't exactly economy driving either. I imagine quite a bit of fuel would be flowing when its developing 400hp.

Should probably put O2 sensors in to help that. Presumably there's only 1...?

wut? usually there are two 02 sensors on RB26

Strangely enough I only have one now that I could spot under my car

Found the second one on the top of my dumps, can't figure out what is going on with the plugs though. Got a pair of 3 wire ones, one flat plug one square.

edit: images

WP_20140714_0111_zpsa09800cb.jpg

Couldn't for the life of me find another 3 plug one like the top one. Dunno where i'd be supposed to plug the second sensor into then...

Found the second one on the top of my dumps, can't figure out what is going on with the plugs though. Got a pair of 3 wire ones, one flat plug one square.

Couldn't for the life of me find another 3 plug one like the top one. Dunno where i'd be supposed to plug the second sensor into then...

Nissan made it idiot proof, the plug on the front o2 is flat and the plug on the rear o2 sensor is square

Defeated my o2s finally. Another custom tool for the collection.

now im guna need a new 22mm spanner...

I live my life a 1/4 of a 1/4 of a turn at a time

Edited by MagicMikeZ32
  • Like 1

Turbo xxxx ECU, injectors, fuel pump, FMIC, Hi flow cat (perhaps)

R34 Turbo Brodi $200

Turbo Highflow, Hypergear, $860

Braided Turbo Oil Line, Hypergear, $88

High Preasure Actuator, Hypergear, $120

ECU, Haltech Platinum Pro Plugin, $1,975

Flex Fuel Sensor, Haltech, $250

Injectors, ID1000's, $720

Fuel Pump, Nismo Intank, $385

Fuel Pressure Regulator, Nismo, $132

Highflow Cat, Venom, $250

Tuning, ???, $1,000

Total $5,980

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • How many of you guys run the synchro os giken set and at what power? Do you then also use the billet plate?  How is it launching with it, any dragy times from 0-60? 60ft?
    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
×
×
  • Create New...