Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

We've been over this before....

ECU isn't compatible. Plenty of servos around. Why bother.

orly?

The reason I ask is because of this

Dalby Ethanol Bio-Refinery under threat of closure. - See more at: http://www.unitedpetroleum.com.au/united/news/news-item/news/2014/02/17/dalby-ethanol-bio-refinery-under-threat-of-closure-#sthash.i1z8FdYx.dpuf

Almost didn't stay up for the race last night. Glad I did :), but boy am I going to pay for it today. Struggle street... :S

Pretty sure I will be going home this arvo to watch it online... I like 4 or the top 5 so I will like the race at least :P

Yeah. And by carrying jerry can problem solved. In fact I can fit 2 of the 20L ones in easily. It was really more of a question of do i stop at every servo along the way or do I take the Jerry can so I can stop less to save time, As I was trying to cram Leyburn and Kawana into one day. My range is limited however, yes, but honestly I don't think that i'll need to go further than a bit of planning will allow at any point in the future.

Part of it is also that i'm still trying to get a handle on the economy of the new Fuel. I was getting 17-18L/100km on the first few tanks but these were city and spirited driving, so max 400km from a tank. From T'bar>Leyburn>home>Logan servo on Saturday I averaged 14.7L/100km which is much better, almost 500km/tank range there.

Once I get the O2 sensors in hopefully it'll be even better again!

I travelled to and from bribie island though so there was some km's involved. I left my house with a full tent got to the BBQ point with half tank, threw in my 20L then drove home and once I got there I had half a tank again. A lot better than I expected really

Guess it's less painful paying $1.25 p/litre

  • Like 1

Mitsubishi ASX is a POS but fuel efficient... Just don't try to overtake, or corner at a normal speed on a slightly rough road... Needless to say it was over 10hrs in a boring car on the weekend...

Yeah. And by carrying jerry can problem solved. In fact I can fit 2 of the 20L ones in easily. It was really more of a question of do i stop at every servo along the way or do I take the Jerry can so I can stop less to save time, As I was trying to cram Leyburn and Kawana into one day. My range is limited however, yes, but honestly I don't think that i'll need to go further than a bit of planning will allow at any point in the future.

Part of it is also that i'm still trying to get a handle on the economy of the new Fuel. I was getting 17-18L/100km on the first few tanks but these were city and spirited driving, so max 400km from a tank. From T'bar>Leyburn>home>Logan servo on Saturday I averaged 14.7L/100km which is much better, almost 500km/tank range there.

Once I get the O2 sensors in hopefully it'll be even better again!

What ecu are you using Pete? Nistune?

How will narrowband O2's help with e85?

Better off removing closed loop IMO and tuning for a targetted afr at cruise ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...