Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Vodka??? how bout German beer instead?.........................wait......................seafood + vodka = imminent disaster

lol at smelling F1

Lol well they don't sound as good as they previously did

So someone just walked past during channel 9 live weather broadcast

"f**k HER RIGHT IN THE PUSSY"

they failed on the dump button on that one rofl, first time I have actually seen it not on youtube

So someone just walked past during channel 9 live weather broadcast

"f**k HER RIGHT IN THE PUSSY"

they failed on the dump button on that one rofl, first time I have actually seen it not on youtube

Like the live broadcast after the bunnies won with the guy with no pants shaking is dick around?

Don't know, i just made the suggestion that instead of getting 3 reach arounds and a shift wristy from Martin that he dig the trench and Scott was all for it.

Would be good for Martin to do some physical labour for once.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hell, I'm sufficiently wary of the ZSS suspension arms, let alone something like a hub.
    • Got it back home and got started pulling the hub off and diagnose the issue. Axle was stuck after removing the 36mm nut so i used a 3 jaw puller to try and push it out and... eH5FXvJ8.mp4   spend the next few hours trying to remove the axle from the remaining hub as it was very much jammed in there when the spindle sheared off. resulting damage as below R53AIy6 - Imgur.mp4   Looks like the was already a stress fracturing in the spindle as can be seen with the darker cracked section My working theory is maybe when the pinion gear exploded last year the shock put through the hub was the initial crack. Then a few events later it finally let go. Just lucky it happened where it did and not 190km/h on the next sweeper or into the hairpin The bearing/hub assembly went in in 2019 and were non-genuine "ZSS" assemblies and no nails were harmed in the process. #BreakHubsNotNails
    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
×
×
  • Create New...