Jump to content
SAU Community

Recommended Posts

So coming to end of the year ill be finished with paying off the car.

Want to upgrade the car

All suspension side is sorted(away bars, coil overs, bracing, bushes etc.)

So I was thinking front mount with plenum gtr style, 80mm throttle body, upgraded fuel rail, hi flow 34 turbo, electronic boost tee, electronic bov, 450lph fuel pump, 550cc injectors, Ecu ( not sure on Ecu yet), fix the zorst and new clutch and clutch lines

Then a pain after all that

Any other mods? Or suggestions to not do some? Or brands

anything

Inputs

Coments

Numbers for new to town ladies

Cheap parts

Link to comment
https://www.sau.com.au/forums/topic/431649-lets-upgrade-that-33/
Share on other sites

Maybe 700cc injectors and wouldn't do the electronic BOV highly illegal and not worth it really. Maybe just go nistune chip for ecu? depends how much money you wanna throw i know for what I want to do which is the high flow 34 turbo, bigger injectors, fuel pump etc, Z32 AFM and ecu with nistune chip etc is about $4500/$5000 or something. Correct me if I'm wrong at all #@Cadmoon

This. Spend that $1k on DBA T3 slotted rotors and some QFM A1RM pads

Also, high temp brake fluid and proper diff fluid and strong gearbox fluid and coolant flush and

f**k that, full fluid flush!

Yep defiently full flush, maybe could get away with the T3 slotted brakes and HPX instead of A1RM pads, maybe, def high temp fluid. How far are you away from 100,000km service?

over 300HP would def go up to the A1RM, i'm running the T3 slotted and HPX and run absolutly fine. inb4 slow jokes

It's more how often you use the power. If you have 300bhp but are only in 1st and 2nd in the city for work, no point. They would struggle to tech temp.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...