Jump to content
SAU Community

Happy Laps - Queensland Raceway 27-10-13


Recommended Posts

To whom it may concern ... dropped the oil... no metal...... shifter out. All it was was the tinest of plates that holds the shifter in place was bent..... some gentle "massage" as natro puts it saw it right... until I can get another one fabbed up

Good to hear it was simple! Didn't I say that? It might be something simple in the selector? real good to hear.

Anyone get vids? I saw a bajillianty GoPros.

they always take time to upload. Also looking forwards to these

Of all the weird dumb-ass things to happen on a track day... My high level brake light is cracked.

So you have the word BRAKE lit up on your dash? my kombi did this years ago because the pedal sank to far under hard braking.

was a sweet as day and a good bunch of drivers,no incidents and a good bloody time by all,even mixed it up with an r8 audi and the f$%#@n alsome r35,you could say i had a good time,but it would be an understatment,well done sau,another great event,didnt even miss the tug boats(supras).

good to hear you enjoyed yourself. As did I, been a while since I had that much fun at QR, clubman is a good layout, and my brakes survived....just.

Wow, ask and ye shall receive! Incidentally, did anyone notice that I went totally the wrong way the first lap? Like through the closed off bit? LOL.

lol, did not notice that.

Thanks for the pics Grego!

and as I mentioned yesterday, I'm more than happy to pay more for Lakeside to reduce the number of cars and make sure we at least break even

  • Replies 288
  • Created
  • Last Reply

Top Posters In This Topic

Happy laps was happy :D

Will try and get around to adding photos and video tonight. Got some good capture in the last 15 minutes as I tailgated people.

You should have some mad abomb footage on there :D

Yes I do, but thought I didn't recorded it at first, was disaponed but found it lol

Yay :) keen to see if it's actually loose or if it just feels like it's sliding all over the shop lol

Haha good, means there's more left in it :)

(In the car it feels like it's squirming all over the place, especially through the second half of turn 1)

Mine is stable as fark until I try and put power down on the corner exit...then she gets loose.

Haha good, means there's more left in it :)

(In the car it feels like it's squirming all over the place, especially through the second half of turn 1)

I saw you get a little sideways a few times

NO, like I mean that the actual light itself, above the rear hatch, has a crack in it. How does that even HAPPEN?

well that sucks :(

Happy laps was happy :D

Will try and get around to adding photos and video tonight. Got some good capture in the last 15 minutes as I tailgated people.

less type, more video!! same goes for you mike

No video tonight :angry:

Go pro studio won't export it.. just sitting on the exporting screen and hasn't moved from 0%... nfi what's going on but I'll try another computer tomorrow night, but should work on the laptop I have (128ssd i5 with 16gb of ram )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...