Jump to content
SAU Community

Recommended Posts

These are the 19" JDM VENERDI wheels that just came off my recent import. The finish is immaculate! they look like they were taken out of the plastic yesterday. No hint of rash. Marks in the picture are just from rain last night, these are real head-turners.

Standard Ford/Japanese fitment. 5x114.3,.... 19x8.5 (all 4) and approx +30 offset.
Comes with the pictured Michelin tyres that vary from 5-20% tread, probably not roadworthy at all, but they fit the size perfectly, 245/40/19.

Inspection and pickup from Hampton Park (at Scotty's place :)

started at $1200 but for SAU member I am open to best nearest offer.

Also on Gumtree so they may go, but holler if you're interested.

EDIT: in VIC, sorry.... should have been clear in the title.

post-51760-0-20082200-1378973282_thumb.jpg

Edited by Kazal
Link to comment
https://www.sau.com.au/forums/topic/431743-venerdi-jdm-19-wheels-shiny/
Share on other sites

Alright, so it's early price-drop time. Seeing as the Gumtree ad is causing me to get Phishing fake PayPal emails... I will hope that SAU members are friendlier!

Down to $1000 the set!! Inspection welcome with notice (as long as Scotty says ok) Hampton Park, Melbourne.

Yep, that's fine. Inspections welcome.

That picture doesn't do them justice, I couldn't find one gutter rash or mark on the face. And great tyres would get you buy for a few months to save for new ones.

  • 2 weeks later...
  • 2 weeks later...

It's a shame to have to be doing this, but the wheels are now going for $650

Someone take them off my hands and help pay my insurance excess from theft attempt on my Stag please!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...