Jump to content
SAU Community

Recommended Posts

Time has come to move this car due to "other" commitments and a new project or 2

Car is located on Central Coast NSW and has been in storage for just over 12 months

Postage is fine given you organize it

All prices are somewhat negotiable

R32 shell $5000

Guards are in primer and rest of the car is white. Some rust around the rear window as usual. Car is around 170mm wider than factory

Body:

- CUSTOM CUSTOM CUSTOM

- Spared no expenses on guards

- Custom moulded to car

- Custom inner arches in rear

- Veilside Front Guards

- Veilside Rear Guards

- veilside Side Skirts

- Sunroof

Suspension/Driveline:

- R33 LCA's

- Adjustable rear camber arms

- metal pinapples

- mini spool

- Strut Braces front and rear

- Hicas Removed completely (all lines)

- R33 power steering pump

- Hicas Lock bar in rear

- Slotted rotors

- r33 clutch master

RB25 series 2 motor (88,000Kms) $3500 (open to offers)

- No hotside

- Plazmaman Plenum

- Plazmaman throttle body

- Splitfire coilpacks

- Big Injectors

- BMI fuel Rail

ARC intake box $300 (never fitted and imported directly from japan)

Hybrid steampipe many (brand new) $300 (T4 split pulse)

Aero mirrors (assuming gktech) $50 (blue lens)

Tilton twin plate (95% on the plates) $1000

R32 Gtst box $700 (with exedy 5puk)

ISC N1 coilovers $650

Bolt in half cage $600

Front Mount 76mm used $60

Front Mount 100mm (brand new) $150

52mm Radiator $70

Oil Cooler and relocation Kit $200 (with all lines etc)

Tial 44mm External Gate MVR (water cooled) $350 (barely used)

3.5inch kakimoto exhaust $350 (came in at 88db) so legal J

Greddy Swirl Pot $100

Fuel Pressure Regulator with Gauge $60

Big Fuel Pump (unknown brand) $150 (intank)

Adaptronic computer $650

Bride door trims $300 pair (slight blemishs)

Bride Gias II Seats x 2 (brand new) $700

Custom Seat Rails (brand new) $200 pair

Carbon fibre A pillar pod 60mm gauges (brand new) $100 (slight ding as seen in pics. Cant see it when gauge is in)

Pics will be up shortly when time is available.

Edited by Frosty
  • Like 1

How much for the injectors? what are they and also how much for the fuel rail? will you separate them? if need be I can give you stockies to throw on

Edit: Didn't read the whole add. xD

Edited by -Jimmy-

How much for the injectors? what are they and also how much for the fuel rail? will you separate them? if need be I can give you stockies to throw on

at this stage not really keen to separate them from the motor as i would want to sell it as a whole. That being said if there is no interest in the next few days ill let you know

need to move this extremely quick

clutch in or out of the car? also can i get a pair of those black shorts ?

twin plate is out of the car. forgot about pics of it....

you can have her for 8k (get a free r32 aswell) lol

Rb 25 t4 twin scroll mani how I may have missed but didnt see a price listed? 44mm gate? What brand?

Josh

Would you take $700 for the seats, rails and door trims?

If so I'm keen and driving to Sydney on Sunday the 6th anyway to pick up a motor

Rb 25 t4 twin scroll mani how I may have missed but didnt see a price listed? 44mm gate? What brand?

Josh

price is listed as $300

Tial genuine MVR 44mm

Manni can take 44 or 50mm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...