Jump to content
SAU Community

Recommended Posts

I Wander if anyone has some knowledge on this? I have been told I may have the S1 gearbox, as it does not have tiptronic. I am going to get an MV Automatics shift kit, and when I rang them they said they have never heard of an S2 auto that didnt have tiptronic. How do you tell the difference?

What year is your car? Transmission type should be on the blue makers plate on the firewall.

Its a 2000. Is it the model number that will tell me what box? I have a pick of the blue plate here:

https://www.facebook.com/photo.php?fbid=345288058948848&set=p.345288058948848&type=1

link doesn't work. On the blue plate it had the paint code, trim code, engine, diff and trans info. The trans on my car (rs s2) is re401b . look for a number similar to thwt on your plate then tell mike what it says.

sorry I left out the r on mine, and was going by memory , so cant remember the rc40 bit but that rings a bell. Perhaps at some stage your car has had a different trans in it. On the dash does it have the spot to display what gear you are in (only lights up when in manual mode, but you should be able to see if it is there or not) Are you in adelaide? If yes just go to mv and let them have a look at it.

Edited by superben

I live in Taree, NSW. Thats why im trying to get the Box type sorted before I get them to send the kit. Im also going to put a bigger oil cooler. I just did a search on the model RE4R01B and on the SAU forums, it says that its a S2 box. A is S1, B is S2. My steering wheel is stock, so its missing the paddle shift? Or do the tiptronics not have paddles?

I dont have the light, nor the buttons on the wheel. its just a solid blank part. Mine was near mint when I got it, Im sure its stock and factory. Even though it was well looked after, it had no mods or new parts. It must be something to do with being a 25txfour. It does have snow mode and diff lock, and an atessa system, with woodgrain dash, xanavi, and velour on the seats and the door trim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...