Jump to content
SAU Community

Fouled Spark Plug Questions

gtr judd

By gtr judd,
in Australian Capital Territory

 Share

Recommended Posts

gtr judd Proficient

gtr judd

Posted
Posted (edited)

Hey guys I have a question or more of a second opinion.

I bought my GTR up recently (hasn't been driven in 14months) and it has a misfire throughout the rev range, cold or warm.

I babied it home where it has been sitting waiting for some attention.

Now I know it could be a number of things but today I pulled the coil packs and plugs for a little look.

I found the coil packs seemed to be in good condition, the rubber boots are perfect, however the coil pack loom is hard and crunchy, some of the clips were brittle and breaking - so I Imagine fairly buggered.

Now the plugs....so the middle two plugs have me a little worried, they where pretty dirty, a little wet looking and smelt pretty heavily of petrol. The other 4 seemed the normal light brownish colour, dry and decent condition.

So Im thinking a few things, MAF or coil pack loom causing it to run rich....it would also explain the dirty rear bumper.

Has anyone got any opinions? I'm fairly new to RBs.

Edited by gtr judd
Link to comment
https://www.sau.com.au/forums/topic/433525-fouled-spark-plug-questions/
Share on other sites
gtr judd Proficient

gtr judd

Posted
  • Author
Posted (edited)

Yea my plan was to drop all fluids and a major service as I'm not sure of the service history. I cleaned and gapped the plugs to .8

As for the injector, it doesn't smell like fuel on idle or while driving. How is the best way to check?

I know it had a leaky injector 6 years ago lol. But I'm not sure if the one injector was fixed or new o rings throughout

Edited by gtr judd
Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

I think your on track. Give it a good service.

and

Clean AFM's

Drop your fuel out and start a fresh. Replace fuel filter

$30 for 6 new NGK BCP7RES plugs.

Grab a new injector loom to by the sounds of things to.

Ps. if your concerned about the injectors I have some Denso 720's

Edited by Sinista32
gtr judd Proficient

gtr judd

Posted
  • Author
Posted (edited)

I think your on track. Give it a good service.

and

Clean AFM's

Drop your fuel out and start a fresh. Replace fuel filter

$30 for 6 new NGK BCP7RES plugs.

Grab a new injector loom to by the sounds of things to.

Ps. if your concerned about the injectors I have some Denso 720's

I will clean the AFMs today, I have a can of cleaner floating about. The tank is nearly empty, so getting rid of the stale fuel shouldn't be hard :)

Are copper spark plugs a better option over iridium's or similar? How much more regularly do they need to be changed?

Are the eBay looms OK or should I get one from a site sponsor, I have been lookin at Kudos?

720s would be a nice step up but then it needs a tune etc, I'll wait till its all running nice before I start upgrading lol. I might take mine out and get them cleaned and checked.

Chuck some O2 sensor and temp sensor action in there too.

These could also cause richness if they're stuffed.

Yea good idea,I'll ave a look at them too

Thanks for your help guys.

Edited by gtr judd
Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

Irridiums on a stock GTR are fine and last 2-3 yrs - Cost $150

Copper on a worked GTR up to a year - Cost $30

Edit: cant comment on E-bay looms - never bought one.

Shouldn't be to exy for OEM off one of our traders.

Kudos is the cheapest you will find.

Edited by Sinista32
gtr judd Proficient

gtr judd

Posted
  • Author
Posted (edited)

Irridiums on a stock GTR are fine and last 2-3 yrs - Cost $150

Copper on a worked GTR up to a year - Cost $30

Edit: cant comment on E-bay looms - never bought one.

Shouldn't be to exy for OEM off one of our traders.

Kudos is the cheapest you will find.

My Gtr is stock motor wise besides a cat back exhaust, so I might just go the coppers for the moment.

Sweet I'll get in to contact with them and see what I can do.

Edited by gtr judd
gtr judd Proficient

gtr judd

Posted
  • Author
Posted

After I cleaned the plugs the other day and re installed them I never started the car, a couple days later I went to and flat battery. I have been swamped with work and one of my boys birthday party's (20x5 year olds :/) as well as football but today I started it

...........

Its alive again, no misfire, ran 1000x better.

Yay can't wait to get it all serviced and running 100%

  • 3 weeks later...
gtr judd Proficient

gtr judd

Posted
  • Author
Posted

Oh are they? Thats is on my to do list.

My misfire comes back intermittently but then drives ok, so I'll replace the plugs shortly and see, the loom definitely needs looking at, being all crunchy etc

RosieR34 Grand Master

RosieR34

Posted
Posted

From about 3600+ it would misfire and would cut the engine off at 5000. Changed sparkies and coilpacks - from memory. Rob may have a better memory as it happened in the first week of purchasing the R33 to which I first entered the scene.

gtr judd Proficient

gtr judd

Posted
  • Author
Posted

Ahh ok, mine has a slight missfire on idle and as soon as you give it any throttle its coughs and farts

I really dont have the money to be throwing parts at it to fix it yet, but once my other car sells and my wedding is 100% paid I will be much happier too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Murray_Calavera
      Tein Circuit Master- rebuild worth it?

      By Murray_Calavera · Posted

      Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • Duncan
      NC MX5

      By Duncan · Posted

      I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Duncan
      WGNC34 - floor mats

      By Duncan · Posted

      Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...