Jump to content
SAU Community

Recommended Posts

Most items from my personal car (R32 GTR 93). All items located in Melbourne. Postage not included in prices.

PM or post here

Interior roof lining - Excellent condition. No damage. Pick up only - $60

IMG_7987_zpsbc4a49a1.jpg

GTR 32 front grille Good condition. Centre plastic clip missing $120
IMG_7991_zpsef06ae53.jpg
Top cowl cover Fits under front wipers. Excellent condition, no damage $70
IMG_7994_zps81ff4556.jpg
Interior carpet Good condition. No stains, no burns. 2 small cuts for harness bolts $240
IMG_7996_zps3b5d9710.jpg
Complete blower motor and fan assembly Working well. Part code 27220-85L00 $180
IMG_7998_zps112d01dd.jpg
Air conditioner cooling unit assembly Working well. Part code 27270-05U02 $450
IMG_7999_zpsb31613de.jpg
Heating unit assembly Working well. Part code 27110-04U01 $290
IMG_8000_zps461436e8.jpg
Rear seat firewall plate Avg condition. Some scratches. Pick up only $80
IMG_8008_zps590a7a2d.jpg
GTR floor mats Complete set. Avg condition, ususal wear, no holes $150 set
IMG_8009_zpsf63f3f45.jpg
Front door outside moulds (L&R) Poor condition. Suit painting. $40 pair
Rubber weather shields (L&R) Heavily worn but still working, no leaks. $50 pair
IMG_8011_zpsa9701d72.jpg
Weather strip retainers (L&R) Poor condition rubber strips, both suit restoring. Metal guides are excellent condition $180 pair
IMG_8012_zps5553d7e8.jpg
Rear seat belts Excellent condition. Barely used. Belts retracted into spool. Comes with fitting bolts $100 pair
IMG_8015_zps58ab4783.jpg
Interior roof lights (front & centre) Good condition. All working correclty. Centre light fitted with LEDs, so much brighter than stock. $20 each
IMG_8017_zps444b2b86.jpg
A-pillar trims (L&R) 3 small holes in drivers side for pod gauge fitting $40 pair
IMG_8023_zpscf1f23c3.jpg
Interior rear side trims (L&R) Excellent condition. All clips in tact, no tears in vinyl. Marks in photos from storage, not permanent $120 pair
IMG_8024_zps4f34721c.jpg
IMG_8025_zps0e9e8903.jpg
IMG_8026_zpsfd2f620c.jpg
IMG_8027_zpse2f69bf4.jpg
Rear parcel shelf (original) Good condition $40
IMG_8028_zpsa3a52da9.jpg
Boot trim, carpet, and board Good condition. Left side trim torn slightly. Holes cut in side trims for struct tower bar. Selling as set $45 set
IMG_8029_zps2f51efdb.jpg
Rear seat (back and bottom) Excellent condition. No holes, tears, stains. $280
IMG_8030_zpsf8877b61.jpg
Air con compressor, bracket, gas cylinder, and hose Good working order $140
IMG_8031_zps0f43beb6.jpg
Original Nissan brake lines and used Bendix pads $40
Rear window wiper Needs paint touch up $25
Child anchor points and brackets Fitted onto rear parcel shelf during compliance process $20
Nissan spare jack (original) Avg condition $25
Nissan standard CAM gears Excellent condition $40
RB26DETT oil air breathers and joins $30
Transfer case from R33 GTR Working order. Pickup only $220
Under bonnet trim Avg condition. No damage, just needs a clean. $25
Rear window lower moulding Good condition, no damage. $55
Sun visors (L&R) Avg condition. Need a clean. $25 pair
Link to comment
https://www.sau.com.au/forums/topic/433709-r32-gtr-random-stock-parts/
Share on other sites

hi mate do you have the rear inner quarter glass trim(passenger side)?

Yes but the plastic is slightly broken and the vinyl is holding it together. Needs repair. If your in melb you're welcome to come check it out

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...