Jump to content
SAU Community

Recommended Posts

Hey guys,

Spent the last 3 months doing a few things to my rb25det and it just died in the ass today. 6th cylinder is letting oil by the piston rings and i think it sounds like it is developing some nasty piston slap!

My list of works completed:

- Reconditioned head, replaced valve seals and replaced valve springs with Supatech valve springs.

- Installed Cometic MLS Headgasket and ARP head studs.

- Installed 256 Camtech cam shafts and 2 adjustable tomei cam gears.

- Rebuilt my turbo at GCG and got it high flowed (stage 2 - with ball bearings, rated @500hp).

- Installed Five-O 660cc injectors (red plug).

- Replaced all gaskets for the top end of the motor.

- Installed JJR Bellmouth dump pipe.

I put it all back together and was able to tune the car upto 8.2 psi and got a nice 184rwkw before all the fun was over.

Even though it didn't work out the best I still had a lot of fun putting it all together and going through the whole project.

What you guys think I should do? Give in and sell it? Rebuild the bottom end? Or just buy a replacement bottom end of a second hand motor?

Ps: thanks to anybody who helped me and answered my questions on this forum - have to admit I did a lot of reading here and learnt a lot about my car!

Link to comment
https://www.sau.com.au/forums/topic/434278-mini-overhaul-of-my-r33-gone-wrong/
Share on other sites

seems like you have kesh......

go forged and stroked rb 30 bottom end. bolt all your shit up and see what you get. then change parts as they start limiting you!

Hahaha let's just say I had cash!

That would cost me like 15k :(

cheapest and easiest option. just get a second hand motor, plenty of guys running 300rwkw+ on standard motors.

if you have the time id pull the engine out and see whats gone wrong.

I was thinking along the lines of getting a replacement bottom end and throwing it in... Just worried about the quality of wreckers.

Wish I had the time right now to rip it apart and see the damage!

buy another stock bottom end for couple of hundred bucks e85 these days 350kw is safe with it no need to waste money building.

Exactly what I was thinking but here's the issue - who's gunna split their perfectly fine motor to give you a bottom end.

Buy a complete running engine, there will be heaps available. This way you aren't up for a top overhaul gasket set and you can do compression/leak down tests. You can't do that with just a bottom end and some questionable build story.

Might give it a try - found an engine for 950$. Hope I don't spend another 2 months doing this for no good result :)

what was the compression of the motor you bought?

It was the motor in my car - did a compression test last Sept and had decent results (can't remember exact numbers). The reason it buckled is because it misfired as a result of bad coil packs... Even though I got the misfire fixed, the damage to the motor was already done.

+1 second hand/import motor, not 2 months, chuck it in this weekend :P , plus might be hard to get a tune around xmas

I wish I could afford it to be honest - need to work atleast 2-3 weeks before I have another crack at it!

faaark!!...all that work for 184kws...i think i would of set fire to it there and then....I put a 5$ bleed tap from bunnings on my stock car with an exhaust and it made 185kw...

what computer you running?

I think you may have misread my post - the engine shat itself and the best reading I received was 184rwkw at 8.2psi. I was planning on running it at 20psi which would of given me roughly 300rwkw. :)

My car now runs at 0rwkw and pours out an awesome smoke show from the tail pipe ;).

PS: Running a microtech.

I just realised - I originally made that post on Tapatalk with paragraphing (and bullets) and when I looked at it on the PC it looks like one massive blob of a post with no structure... thats odd :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...