Jump to content
SAU Community

Wireless Home Security (Cctv)

CLNSKY

By CLNSKY,
in New South Wales

 Share

Recommended Posts

CLNSKY Experienced

CLNSKY

Posted
Posted

Hey guys, didn't know where else to post this.

Anyone here familiar with systems that can be installed for homes that have say 4 wireless cameras connected to something that shows them all onto a monitor and can record them all onto a hard drive?

Any suggestions on products or where i can buy good quality products?

Or if you are an expert and have experience installing them i would like to hear from you as well! (Will be getting something for my house very soon).

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/434400-wireless-home-security-cctv/
Share on other sites
epoq Rookie

epoq

Posted
Posted (edited)

I bought a couple of the basic wireless Swann units. They're very consumer focused (ie. simple to install and operate). They'd be no good for what you're after though. You can view them from your IOS or Android phone easily using the App. The sucky side is that there is no method to record anything to harddrive and they're pretty much trying to sell you a monthly recurring fee to use their 'cloud-based' motion recording system. You get a free trial for 30 days and as much as it works well - I hate lock-in recurring fees.

Edited by epoq
  • 2 weeks later...
75coupe Grand Master

75coupe

Posted
Posted

Ive installed cctv wireless systems jnto workshops and homes, id definitely say go wired, more reliable, no wireless issues but is more expensive to install...

Basically the more the you pay the better you get. Wired is the way to go, if you look at the high end systems they are all hard wired, in saying that though i have clients with wireless with access from iphone and it works ok...

75coupe Grand Master

75coupe

Posted
Posted

Also look at the lens on the cameras as some have a wider view than others, so if the camera is mounted like 6m away from target youll need a view to be able to make it cover the most area

Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

try using D-Link products, simple as bat shit to set up and buy like a Synology NAS to do all the recording...

alternatively you could build a PC specifically for recording all the wireless D-Link cameras, just pop in RAID1 with 2x 3TB NAS HDDs and a high effciency PSU and off you go.

I'm currently using a D-Link wireless 932L camera, works a treat.. automatic day/night with sound. I can remote into it from my phone and see/listen to what's going on and my Synology DS-212 NAS records everything

CLNSKY Experienced

CLNSKY

Posted
  • Author
Posted

Also look at the lens on the cameras as some have a wider view than others, so if the camera is mounted like 6m away from target youll need a view to be able to make it cover the most area

Thanks for the tips mate, definately keen to get wired installed, but in a 2 storey house i hear its going to be uber expensive.

try using D-Link products, simple as bat shit to set up and buy like a Synology NAS to do all the recording...

alternatively you could build a PC specifically for recording all the wireless D-Link cameras, just pop in RAID1 with 2x 3TB NAS HDDs and a high effciency PSU and off you go.

I'm currently using a D-Link wireless 932L camera, works a treat.. automatic day/night with sound. I can remote into it from my phone and see/listen to what's going on and my Synology DS-212 NAS records everything

I have thought about that, i have a server running freenas but i need external cameras and if they need power + ethernet, its pretty much the same thing to get installed lol.

Thanks guys, still looking but :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...