Jump to content
SAU Community

Recommended Posts

Nah man. Was ordered two months ago. I'm betting late February if delivery in Japan works well with the container it's being put in.

They both have taller ratios.

Assuming a 265/35x18 tyre and stock ratios and a rev limit of 8000 RPM the speeds are as follow

Stock

1st - 75

2nd - 120

3rd - 180

PPG Helical and straight cut dog

1st - 89

2nd - 143

3rd - 189

OS GIKEN

1st - 87

2nd - 138

3rd - 190

Is the os giken speeds that you have showed are they the correct speeds even with the close ratio gear set? I would have thought that the closer gear set would shorten at least gears 2,3,4 and 5? Ow btw are those figures for a 34 ? Or 32 gtr?

Edited by boobeedoobee

The OS GIKEN 5 speed is most definately taller than factory gearing. That is assuming 4.11's in the diffs. Gts4 ratios will shorten that by 7% iirc.

What's the setup?

It would make the gearing awfully short with the 4.11's. You'd be changing gears like an Evo. It isn't the cheapest conversion to do.

Like he said what's the set up?

Set up is an r34 gtr getrag 6spd gearbox fitted to a 32 gtr .. it's the whole box including everything needed to do the conversation

Set up is an r34 gtr getrag 6spd gearbox fitted to a 32 gtr .. it's the whole box including everything needed to do the conversation

By setup I meant what's the engine/turbo combination.

Boobee. The reason I was asking turbo/engine combo is that (and this is my opinion only) the taller gears in the OS set make a lethargic bottom end of a 2.6 L engine and make it even more pronounced.

For example, a mate on here on a pretty decent R33 GTR put one in and ended pulling it out and going back to stock ratios. That was predominately a track car too. 2.6 with -9's and -5's at different points.

Just something to think about.

Bakemono. Cheers man :D. Be good to drive it again lol.

Oh the lols

only do the Getrag if you do the 3.545 diffs as well, 1st gear in my 34 is now and always was useless even when it was a 2.6 with -7s, so add 4.11s to that and you may as well stay with the 5 speed as you won't use first with the Getrag

I can't wait to see the difference between 4.11s and 3.545s with the two identical OS88s once put side by side :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...