Jump to content
SAU Community

Snapped Fuel Line To Fuel Pump Connector

amac1984

By amac1984,
in Four Door Family & Wagoneers

 Share

Recommended Posts

amac1984 Rookie

amac1984

Posted
Posted

Hey all, has anyone out there in forumland come across this dilemma.

when accessing the fuel pump, i accidentally snapped off the male connector from the plastic fuel pump assembly to the fuel line (see photo)

anyone fixed this before, or has a spare one i could buy?

judging from the look of the fuel pump assembly, the whole piece is one giant molded piece of plastic and needs replacing :'-(

post-117731-0-47178200-1384157050_thumb.jpg

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Yep, it's stuffed. You will need the top part of the assembly at least. Get a quote for the complete assembly from Nissan, you will quickly see you should have been more careful trying to remove the fuel line...

Hopefully someone else has a spare for you off a wreck, if not I may be able to send you just the top part from my spare assembly.

tosic33 Enthusiast

tosic33

Posted
Posted

You have an M35 wreck Danny?

Nah sorry Scott, C34, i was under the impression that C34 went upto 2001 so was just giving the option if he has a C34.

Or does the picture explain which model it is?

scotty nm35 Grand Master

scotty nm35

Posted
Posted

It is exactly the same as an M35 tank, I assumed it was, unless the C34 one is identical... Perhaps the OP can let us know if he returns?

Hopefully he can get the snapped off pipe out of the line too. Replacement fuel rails would be a lot harder to ship.

Ben C34 Grand Master

Ben C34

Posted
Posted (edited)

C34 has plastic tank and the lid is held on by a spin on ring. That seems metal and lid bolts down = m35? At a glance very similar.

Edited by superben

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...