Jump to content
SAU Community

Recommended Posts

In the Daily Telegraph today, watch the video too.

http://www.dailytelegraph.com.au/news/nsw/reading-the-riot-act-to-dodgy-car-dealers-over-odometer-tricks/story-fni0cx12-1226759295622

NSW Fair Trading and the Motor Traders' Association have warned the odometers of more and more vehicles - imports in particular - were being tampered with because, as things stand, "unscrupulous" car yards can get away with it.

But under a plan being developed by Fair Trading with Roads and Maritime Services (RMS), cars bound for Australia would have to be accompanied by papers showing their odometer reading at the time of deregistration in that country. This is not a requirement at the moment.

294847-e48e866a-4c42-11e3-95c1-9e9b6c573

John Rolfe in front of a questionable Toyota Supra on Parramatta Rd, Concord. Source: News Limited

Fair Trading is also exploring whether the Motor Dealers Act should be amended so car yards have to provide potential buyers with such information. Then dealers wouldn't be able to plead ignorance - which is enough to get them off the hook under current laws.

"Odometer tampering is a problem and it's on the increase," Fair Trading investigations director David Byrne said. The main source of imported used cars is Japan - about 5000 cars a year.

A web-based service which claims to be able to ascertain odometer readings on cars from Japan said 90 out of 100 odometers checked at the request of Australians were found to have been wound back.

In NSW there were 13 breaches in 2010-11 involving odometer tampering, 20 in 2011-12, 15 in 2012-13 and seven in less than four-and-a-half months this financial year, Fair Trading data shows.

Action is already on the way, with the penalty for tampering about to be doubled to $22,000.

Public Defender began investigating tampering after a tip from a victim, who pointed out a 2002 Toyota Supra. Auction papers he supplied - which I could not verify - said the car had done 91,170km when sold in Japan. This week I found the car on Sydney's Auto Alley. The odometer read 48,260km.

When it was put to the dealer, who cannot be named for legal reasons, that the odometer had been wound back, he said it wouldn't surprise him: "If that's happened it's happened on Japanese soil … I'm not the one who tampered with the odometer."

The dealer said the yard tried to limit its exposure to cars with tampered odometers but it was "rife" in Japan. There was no way of telling if a car had been driven further than its dashboard indicated.

Later the dealer rang to claim the auction papers I showed him may have been altered but he could not provide proof. Regardless, the Supra would be "removed from sale", he said.

A good step forward?

Edited by colourclassic
When it was put to the dealer, who cannot be named for legal reasons, that the odometer had been wound back, he said it wouldn't surprise him: "If that's happened it's happened on Japanese soil … I'm not the one who tampered with the odometer."

Right-o ;)

Well, when their stoopid enough to post Japanese agent shot videos with the original mileage visible, the car in their possession and the car arrives with 90k kms less, then it shouldn't be too hard.

However is that good enough for the law? I dunno.

You're able to request for the de-registration papers when the vehicle was in Japan.. it shows you the exact details, the KMs, etc...

I like how dealers always blame the Japanese winding down KMs, etc.. they're a very honest society, they wouldn't do any of that shit. Even when the tsunami took out a town, ATMs were destroy and money was floating about.. no one looted, no one picked up a single note floating about. So what says they want to even wind their KMs back?

It's all done here before compliance.

You're able to request for the de-registration papers when the vehicle was in Japan.. it shows you the exact details, the KMs, etc...

I like how dealers always blame the Japanese winding down KMs, etc.. they're a very honest society, they wouldn't do any of that shit. Even when the tsunami took out a town, ATMs were destroy and money was floating about.. no one looted, no one picked up a single note floating about. So what says they want to even wind their KMs back?

It's all done here before compliance.

Interesting idea, and I agree with you about Japanese culture. However I believe there are a lot of people of a certain ethnic group that is not Japanese that are a big part of the car business. I've seen details of it in the past, however can't remember where I saw it.

so those dealers blaming the Japanese docks can go get fuarked...

The cars in Japan are all auctioned with usually 100 000+ kms on them some how they end up here with like 1/3 of the kms. I've seen it with my own eyes, same car in an auction site, de-registration papers, then blame at XYZ dealer in Parramatta Road with 1/3 the kms.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...