Jump to content
SAU Community

Recommended Posts

I have posted this in car parts instead of whole cars because the car is not whole :) Moderators please correct me if this is wrong.

For sale are the following items:

R32 GTST w/out engine or gearbox

- Diff still in place. Aftermarket steering wheel, gauges etc, Aus spec Tein coilovers that were 6 months old before the car was decommisioned approx 6 years ago.

- Interior still in tact but will need a cleanout

- Tyres old as f*ck but 80% tread at least.

- Paint in poor condition but will not be hard to freshen it up. Only rust is surface rust on roof sides and bootlid - will need a respray + fix a couple of minor dents. Boot lid needs replacing (was replaced ages ago as a wing-less bootlid but dodgy repair means rust under bog so it will prob need to be turfed. Has front Veilside copy bar

- Brakes were 80% new (DBA slotted + EBC pads)

- Early PWR vertical row intercooler

$2500

Garrett GT4508 Turbo (used) + CN Racing 50mm wastegate (brand new)

- Great condition, hardly used. Comp cover outlet will need pipe welded as it has been cut off where the hose could normally join

- Wastegate is brand new, never used. Throwing it in because IDGAF

$1500

RB25 Prepped Block with Forgies

- RB25DET Prepped block by Chilton Engineering (all the normal shit - acid/hot tank, decked, bored, honed etc)

- Eagle H-Beam conrods

- ROSS Racing Pistons

- Crankshaft has had the oil gallery plugs changed but no crank collar fitted

- Everything balanced etc

$2500

RB25 Cylinder head in pieces w/ Solid lifter conversion and cams ready to go

- Plain jane unmodified RB25 cylinder head that's been stripped and cleaned ready for porting (no valve guides or valves/springs etc)

- Supertech solid lifter conversion brand new ready to go into the head (This item I had listed for sale for $1800 by itself in this forum also but due to me selling all the other stuff I thought I'd mention it here as a complete ready to rebuild head instead)

- Camshafts custom Tighe Cams IN 280 x 10.4 and EX 290 x 10.4

$2000

If someone is interested in buying everything all together, I would be interested in negotiating a solid price that would be considerably cheaper

Link to comment
https://www.sau.com.au/forums/topic/435196-r32-gtst-parts/
Share on other sites

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...