Jump to content
SAU Community

Recommended Posts

My r32 with rb25 conversion won't idle after doing a highmount conversion. It will rev fine and pull great. Light throttle coasting it will miss and carry on and it won't idle at all, just dies. I tried different afm. Cleaned aac. Checked all cooler pipes. Checked vac lines that I can see. Took Bov off and blocked vac lines. it idled before I did highmount swap

Link to comment
https://www.sau.com.au/forums/topic/435336-rb25-wont-idle/
Share on other sites

Ok. I am going to assume you changed the turbo, as swapping manifolds tends to suggest that. And as you didn't mention tune, I will assume that no tune was involved. My diagnosis, based on little info and taking a wild guess.... you killed the engine. (broken rings/ ringlands/ head gasket from pinging)

Unless you have more info to add we can only guess.

Edited by superben
Link to comment
https://www.sau.com.au/forums/topic/435336-rb25-wont-idle/#findComment-7117487
Share on other sites

Ok. I am going to assume you changed the turbo, as swapping manifolds tends to suggest that. And as you didn't mention tune, I will assume that no tune was involved. My diagnosis, based on little info and taking a wild guess.... you killed the engine. (broken rings/ ringlands/ head gasket from pinging)

Unless you have more info to add we can only guess.

I've broken one of my rings and I occasionally get some blue smoke coming out the tail pipe... My car occasionally has this issue where if I clutch in at high revs, the revs will fall till it hits 0 and stalls... Do you think the 2 issues are related?

Link to comment
https://www.sau.com.au/forums/topic/435336-rb25-wont-idle/#findComment-7117577
Share on other sites

That doesnt mean much

Has the turbo been upgraded and was it just thrown on and hope for the best?

is it a stock engine and how many kilometres. It still could have cracked a ring land but hopefully for your sake its probably just not tuned properly

Edited by ido09s
Link to comment
https://www.sau.com.au/forums/topic/435336-rb25-wont-idle/#findComment-7117843
Share on other sites

this isnt entirely true because the AFM will read more air flow on adjust fuel mixture on idle etc etc etc

Ah I forgot about afm. Been running a map to long to remember haha. Still shouldnt be a problem at steady idle though?

Link to comment
https://www.sau.com.au/forums/topic/435336-rb25-wont-idle/#findComment-7117945
Share on other sites

I highly doubt the engine would draw more air at idle just because it has a larger turbo on it..... but stranger things have happened and the inlet could have had some affect on the air flow through the AFM if its running one which has caused it

Edited by ido09s
Link to comment
https://www.sau.com.au/forums/topic/435336-rb25-wont-idle/#findComment-7117951
Share on other sites

it can happen as all air is drawn through the AFM even on idle and thus bigger turbo takes more air (idle or not)

im not say this is the issue however food for though as we still do know any further information to help diagnose

I have to disagree with that. I can't see how the turbo that's not bring driven enough by the exhaust would have any effect at idle. If you pulled the afm off a nice running car and took apart turbo system then put afm onto throttle body I bet it would idle fine.
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/435336-rb25-wont-idle/#findComment-7118024
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...