Jump to content
SAU Community

Recommended Posts

Hey guys just hoping someone could enlighten me on some troubles with my 33 turbo etc.

I have searched numerous times for answers to the problem but still no luck :|

R33 GTS-T series 2 96

The mods are as follows

Splitfire coilpacks

FMIC

Full 3 inch exhaust with split dump and high flow cat

Apexi pod filter

Stock turbo setup nothing changed at all

Okay so down to the actual problem.

So generally boost kicks in at about 2500-2700rpm on the stock turbo anyway since having the exhaust done as soon as I left the workshop hey presto turbo kicks in at 5500rpm which is ridiculous ! Sure enough the exhaust sounded great but I guess I was in for a tune.

Luckily I had an Apexi power fc already on the way but I can't understand why the turbo kicks in so late when I only had a split dump installed and resonator removed.

Now here's the weird thing.

About 3 weeks later I was boosting it hard on a hill run and after a good flogging the turbo somehow began to work normal again and started spooling at 2500-2700rpm and had been fine ever since except the exhaust is now a lot quieter than it was when I left the shop

I'm just wondering why is it that it somehow went from being ridiculously late and then back to normal again? Wastegate stuck open? And why is the exhaust now seemingly quieter I don't know so send help guys!! Haha

Many thanks in advance

Curtis

Link to comment
https://www.sau.com.au/forums/topic/436220-r33-turbo-issues/
Share on other sites

thanks for the heads up guys wastegate was definitely sticking....

it got stuck once today on the dyno run :O

So what do you all think?

Revert back to a straight downpipe
Get a dowpipe with a longer intergrated dump?
Bellmouth style dump pipe like Darth Kerjo said

Cheers guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Lol a few are like that with no intention of being reborn unfortunately. 
    • Done, I'll do mine soon too - whenver I take out the car next. I can cheat and make it quieter by turning off VCT at idle too - but I lose the braps
    • All trim back in wired running driving. Few things to follow up on but not far off the return to the road. att.6HN4wP38LTIOISkhA8eACoBFqzfgQMahZPLA8ut0pqE.mp4 att.w2q0ux2PGuqgQTj2Os13cNHQtqcSEcCAhD_CAXy_IQM.mp4
    • The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
×
×
  • Create New...