Jump to content
SAU Community

Recommended Posts

Hi all,

I have been having a few problems with my R34 gtt.

If I leave the car off for 4+ hours it will either a) start then stall and start back up fine or b) start then run rough for a second and then it's fine.

I have tried priming the fuel pump a few times with the ignition before starting bit it didn't fix the problem.

Also if I leave it idle for a minute then give it a rev it will blow a lot of white smoke for a second

I have recently gas tested the exhaust and it was very high for hydrocarbons (unburnt fuel)

I am thinking the injectors may be leaking but after some confirmation, who would people recommend to rebuild them? They are nismo 770cc.

Edited by BlackBox
Link to comment
https://www.sau.com.au/forums/topic/436336-leaking-injector-signs/
Share on other sites

I would be doing the following:

Put a fuel pressure gauge on it, turn the engine off and clamp off the fuel lines. if the pressure starts to drop, your injectors are leaking.

Although white smoke wouldn't be indicative of a leaking injector.

Remove the spark plugs and inspect for oil, your valve stem seals may be leaking. While the plugs are out, pressure test the cooling system. Wait and then crank it over. If there is any signs of coolant, you have a head/gasket problem.

Good luck.

Haven't been using any coolant so I'm hoping it's not a head/gasket problem. I have ordered an inline fuel gauge and cooling system pressure tester so I can do those test when they arrive.

Also the Pcv valve hose running to the manifold gets sucked shut at idle, then puffs out like normal at the slightest crack of the throttle, the Pcv valve has been cleaned and is functioning so I'm thinking the hose may have perished and is too soft.

Have you bought the car recently or owned for a long time and it's only just started doing this?

I have a similar problem that is caused by my lack of a 1 way valve on my fuel pump. When cold for some reason it is happy to prime and start up straight away but if I drive somewhere turn car off and go to turn it back on in 30+ mins I need to crank the engine like a normal start, stop and then crank again then it will start nicely. I feel for me it is due to a form of vapor with most of the fuel in my lines draining back to tank and the fuel that is left warming up and becoming a gas as I have had no other issues.

  • 2 weeks later...

I could refit it but I would rather leave it off if possible, really trying to get a clean engine bay,

I have an adjustable sard fpr so I was under the impression the standard items were of no use..

I also just purchased a plazmaman fuel rail which I think eliminates the other damper mounted on the standard rail.

If this is the cause could it be rectified by fitting a check valve or adjusting the fpr

Yeah I set mine too, but they dont seem to take much of a knock to upset them. I also grabbed the wheel on the throttle body and turned it. It wasnt fully closed so when I had set it up before it wasnt set with the throttle on the stop haha. so I cleaned the butterfly too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...