Jump to content
SAU Community

Recommended Posts

HEy guys and gals, last saturday we decided to lay off the cruisin and have a night of drinks, pool and games in the city. Turned out to be good fun!

A few of us are keen to do it again this friday, from about 9:30pm onwards in the city at a bar called Maloneys on george st. Its directly opposite the main cinema complex.

Everyone should know the cruise slu7s no. now 0413 309 259

Hope to see you all there!

Cheers,

Loz:)

Link to comment
https://www.sau.com.au/forums/topic/4374-this-fri-410-meet-no-cruisin/
Share on other sites

you guys were there last week? i was there with 4 mates. we were the ones putting on the 80's music on the jukebox. the place is pretty dodgy, BUT, happy hour from 5 til 9pm is $2.50 beers and spirits. hence, my $70 went a longgggggg way last week. we went off to retro after that.

maloney's is a great place to get hammered for cheap before ya gout elsewhere.

cheers, MARK

Originally posted by 88silhouette

we were the ones putting on the 80's music on the jukebox..... we went off to retro after that.

sounds like you have similar music tastes to me!! ;):) :headbang:

Originally posted by GTR-80Y

HEy guys and gals, last saturday we decided to lay off the cruisin and have a night of drinks, pool and games in the city. Turned out to be good fun!

what'd i tell you guys. cruising every week gets booring.

i'm there and i'm buying $40 worth of tokens ;)

bloody oath! it's a top song. how bout Rockit by Herbie Han****?? White Wedding by Billy Idol? Funky Cold Medina by Tone Loc? hehh. cruise on october 20th. got 3 hr31 turbos. and one modded aussie r31 with big turbo. should be interesting. couple of r32's are coming as well. wonder who'll be faster. have you guys run into the dude in penrith with the rb26dett in his r31? it hammers. seen a few newer skylines get ripped by it.

cheers, MARK

80's music - in da house @!

The 80's ROCKED - I remember wagging school , going down to whaley (whale beach) listening to FUNKY TOWN by Pseudo Echo !!

They were the dayz......

I would be there with you guys but I 'm taking a Cruze up to Port Macquarie for the extended long weekend - Hope I don't get double demerit booked !!!

Maybe another time hey ???

About time we had another proper Northern Beaches Meetup & Cruze hey ??? Since I have my Line now ..........

Wadayarekon ?

Yeah cmon guys, Eugine will bring some butt ugly skanks for the first fifty posters!:lol:

And stop talkin about 80's music u damn freaks! The 80's sucked big time, even the 90's shat all over the 80's~! I think your mullets have overgrown and put too much stress on your brains!:)

TRUE!!!! The 80's sucked more d*ck than a 50c hooker.......

The 00's suck ass aswell. I can guarantee that in a few years people will be looking back at the fashions going around now & saying sh*t about how butt ugly it all is........just like we do with the 80's now.



  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...