Jump to content
SAU Community

Recommended Posts

Currently in the process of selling my F6 Ute and was looking into Zeds and V-Series Skylines. I'm trying to work out what the main differences are between these cars. From what I can tell, they are the same engine and driveline, do they share suspension? What about general feel of the car, does a Skyline drive any better/worse/different than it's zed counterpart. I noticed that by and large the Skylines are much cheaper also.

Then I had a look at 2002+ Stags and they are unbelievably cheap, some sub $10k. But I find the branding confusing, there's some that are turbo and some that aren't, I have quite worked out which is which. How do the Stag's hold up against the coupes? Which model Stag is the one to go for and why?

Also, what's the state of these cars when imported from Japan? Do they have the same issues that R series Skylines suffer from? Wound back odometers, rust etc.?

And how is the VQ engine? More reliable than an RB? What about the gearbox? I must say I would prefer a manual, but would consider an auto if it's cheap enough.

I think I know a fair bit about RB Skylines, but I know next to nothing about V-Series liners. Interested to hear your opinions guys.

cheers

Link to comment
https://www.sau.com.au/forums/topic/437479-zeds-skylines-stageas/
Share on other sites

Well, I'll cover off the stagea side of things.

The M35 stageas started in 2001. From 2001-2003 the eligible models are all turbo. They run a vq25det 206/400nm. The chassis is very similar to the v35/z33, meaning it can be upgraded to handle quite well. Being turbo, power is reasonably easy to extract. There areafewweak points.the stock turbo is fragile, the afms temperamental, and the motors cam actuators wear with age. There is no ecu flash option, so people piggy back them when tuning, which is a bit tricky. A properly sorted m35 will walk a v/zin a straight line.

The second series, 2004.5 on have the same motor as the v/z. Vq35de. There was some styling changes, and some changes to the awd system, and interior update. It has a flash able ecu, and doesn't have the issues of the first turbo series motors.

The models go RS then RX, then AR-X, the later having the over fenders and stock 18s. Then there are Axis models, which have different interiors, but no mechanical changes.

The v35 is more of a GT car, while the Z is more of a sportscar.

Drive them all, and see what you like :)

Thanks for the response. Have you driven all three cars? As far as driving experience goes, what's your preference?

To be honest I have no interest in modding (already have a moneypit for that!) so I just want something that's comfortable and fun to drive out of the box.

Can you describe the Stag's handling? Unmodded I feel like it would handle like a commodore, is that far from the truth? How's the auto?

I plan on driving them all at some stage but it's always good to hear what others think.

Yup, driven them all.

The stock stagea handling isn't anything special, but I wouldn't say commodore :P Has grip, but the roll and weight is very apparent. Not really fun. Nismo springs and just some sway bars make a huge difference.

The Z is obviously the most focused out of them, and the v35 is a middle ground. Are you looking for a sedan, coupe?

The auto boxes are the same model 5spd across all models, just with different programming. The stagea is the worst IMO, the Z the best. The later series two stagea boxes are heaps better then s1 cars. They can all take a Transgo shift kit that makes them much nicer and shifts up quick.

You're welcome to come and take a spin in mine if you want.

Modding isn't necessarily a frivolous affair. When things like shocks get worn, they can be replaced with aftermarket units. As per above, shift kits help greatly in the speed of the auto box. With the stagea, a turbo replacement is a definite possibility in your time owning one, then you'll probably be looking at a modified replacement turbo.

Edited by zoomzoom
  • 3 weeks later...

Ill cover the V35s. Sedans came out first in 2001 with 250GT (4AT VQ25DD 158kw), 300GT (5AT VQ30DD 191kw) and 350GT (5AT/8CVT VQ35DE same as 350Z) a 6MT was added in 2003 to the sedan with the launch of the V35 coupe which also had the same 5AT as 300GT

Early 350GT sedans had an option for a 8 "speed" CVT transmission. Opinion is varied but i would avoid if possible. Fluid changes are not cheap, it can only take a special fluid by nissan and because the car is getting on in age the fluid is getting harder to come by and quite expensive. The 5AT with a shift kit like alex mentioned is a better option or a 6MT.

The V35 coupe has the same running gear, suspension as 350Z (350z exhaust is shorter than the V35 coupe but otherwise the same, sedans are the same as coupe upto the axle back) only the Z is 100kg lighter and is stiffer.

Open diffs and average brakes came standard on all models. Early V35 premium manual coupes and track 350Z manuals had a VLSD diff and factory brembos which are interchangable on all V35s. Brembos got discontinued during the series two introduction.

V35s picked up the same update as the M35 stageas like alex mentioned with refreahed styling inside and out and equipment changes.

Factory tick options include aero parts, rays forged wheels, a sort of "bi-modal" exhaust, radar cruise, sunroof, carphone, T-junction camera (cameras in the side of the bumper so you can see whats coming if the view is obstructe- very cool) momo steering wheel and the usual matts, plastic etc etc

Depending on the build, model and transmission a sedan can fetch 7-18k and a coupe 14-25k.

Edited by Howaitonaito

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...