Jump to content
SAU Community

Recommended Posts

While digging out my old brake setup I stumbled across a bunch of stuff i had forgotten about and I no longer required

parts are as follows.

1) R34 GTT air conditioning Compressor $50 - In good nick, removed as the car doesn't run A/C

2) R34 GTT Gearbox Crossmember $40 - got it as a spare, but not needed (open to offers)

3) R34 GT gearbox tailshaft $40 - Bought the wrong one and couldnt take it back, just want to move it along

4) R34 GTT bottom INTAKE runners $50 - Bought this to do a custom CPC plenum but never did it

5) R34 GTT Top INTAKE manifold with Throttle bodys and IAC $50 - missing a few hoses which are easy to replace (currently not pictured!)

6) R34 GTT Rear Driveshafts with Stub axles $100 - put a GTR diff and shafts into my housing so these are not needed anymore. No rips or damage whatsoever, have been standing upright for about a year 5 bolt type

All parts located in Penrith Sydney but can be delivered locally to Penrith or Liverpool after 1PM weekdays,

Happy to post these anywhere at aditional cost.

now for the pics

A/C Compressor

mf2fidd.jpg

Lower intake runner

5HeyZOc.jpg

Crossmember side

5qCTAy8.jpg

Crossmember Bottom

QqRf0Uw.jpg

Tailshaft

GARfGJV.jpg

Driveshafts with Axles

uihxuaI.jpg

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...