Jump to content
SAU Community

M35 Hid Ballast / Parker Bulb Replacement & Model Number

jackbh241

By jackbh241,
in Four Door Family & Wagoneers

 Share

Recommended Posts

jackbh241 Collaborator

jackbh241

Posted
Posted

Hi Guys,

A few questions here regarding the headlights on the M35.

1. For a while now I've had problems with the headlights cutting out (many times every time I drive it). It used to be only the passenger side lamp and figured I could swap the ballasts over to see if that's the problem however now it's both so I guess that isn't an option any more. I am assuming it's the ballast anyway but any thoughts as to how I would tell given that both cut out (at separate intervals - not at the same time).

2. Any one know what ballasts we can use? Preferably cheap ones? Or official model numbers?

3. I personal find the lamps pretty dull (doesn't help that you can't adjust them any higher than about 2ft in front of the car), any suggestions for a brighter bulb?

4. My passenger side parker lamp is also out, does anyone know the model number or aftermarket options?

Sorry about all the questions but any help would be GREATLY appreciated!

Thanks all,

jackbh241 Collaborator

jackbh241

Posted
  • Author
Posted

haha yeh tried that just doesn't get quite high enough imo. Might just be a preference thing or the whole unit is badly aligned. Or I was just recently in a late model RX-8 and got jealous of the perfect line those things throw across the horizon. Amazing!

Lakes101 Experienced

Lakes101

Posted
Posted

You can get cheaper ballasts of eBay and xenon burners aswell both for pritty cheap I got some bulds there before had a problem with them cutting out but it generally the bulbs going not the ballasts. I got 10000k bulbs super bright great light dispersion aswell but don't last asking as OEM ones but are 1/10 the price $8 for two so I just bought 6 pairs one pair lasts about a year.

jackbh241 Collaborator

jackbh241

Posted
  • Author
Posted

You can get cheaper ballasts of eBay and xenon burners aswell both for pritty cheap I got some bulds there before had a problem with them cutting out but it generally the bulbs going not the ballasts. I got 10000k bulbs super bright great light dispersion aswell but don't last asking as OEM ones but are 1/10 the price $8 for two so I just bought 6 pairs one pair lasts about a year.

That's exactly what I wanted to hear. Thanks!

Daleo Grand Master

Daleo

Posted
Posted

10000k are far too blue; even 6000k are getting too blue in my opinion.

You want 4200k for the best light dispersion. Coincidentally this is what they use from the factory.

joshm35 Veteran

joshm35

Posted
Posted

if the switch inside is at the highest point they you will need to adjust them by screwing the plastic nut on the back of your lights( it is on the little motor attached to the rear of your headlights).

richzx Community Regular

richzx

Posted
Posted

Do HID bulbs need replacing after a periosd of time? I saw on another unrelated forum a discussion about replacing HID bulbs after a few years as they begin to lose their brightness, does this sound right? Mine are fine (I think) but they are 10 years old and I will replace them if they are a consumable item. The discussion was around BMW HID bulbs in cars built around the same time as m35.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

They will lose brightness over time, but seriously, how many hours a day do you use them on average? They might last years longer, and at the price of OEM burners I would keep the old ones a little longer.

richzx Community Regular

richzx

Posted
Posted

Fair enough I think mine are ok but not as powerful as I'd hoped but as you say I don't use mine much. I'm in no hurry to replace them and thought I'd ask as I hadn't heard that the lose brightness over time previously. What are new bulbs worth anyway?

  • 3 weeks later...
Erop Contributor

Erop

Posted
Posted

New bulbs surely produce more light!

always running with lights on (law tells so even in shiny days)

3 month ago i replaced oem bulbs (i believe factory ones, never changed before) with Osram 66050 (d2r for OEM installation), 50USD/pair - difference is visible

533 RYC Proficient

533 RYC

Posted
Posted

6000k bulbs put out an icy white light with a hint of blue. Sunlight is typically around the 4500k (white spectra), hence why manufacturers use that figure. The higher you go in k number, light quality reduces. 8-10,000k is useless as its in the violet spectra.

Not sure why Nissan, in their wisdom went with a spread reflector instead of a projector type lense.

In saying that, I converted my R32 to HID with the projector type lense & the the light dispersion was crap, nowhere near as sharp as it was in my E30 BMW (I ran 6500k & halogen high beam on the highway was not needed!). So in saying that, the reflector setup inside the projector has alot to do with how well the transfer of light occurs.

From memory, in my C34 S2 they are D1R or D2R 6500k, bought off ebay (china) around 2yrs ago, & still going strong.

  • 2 years later...
stripey Collaborator

stripey

Posted
Posted (edited)
On 23/01/2014 at 0:56 PM, scotty nm35 said:

They will lose brightness over time, but seriously, how many hours a day do you use them on average? They might last years longer, and at the price of OEM burners I would keep the old ones a little longer.

Should have told richzx to replace them lol. Now i'm in charge of replacement so they lasted a further 2 years and 9 months.

Edited by stripey
update names

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • Kinkstaah
      My BMW E39 528i touring

      By Kinkstaah · Posted

      @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • GTSBoy
      My BMW E39 528i touring

      By GTSBoy · Posted

      These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • soviet_merlin
      My BMW E39 528i touring

      By soviet_merlin · Posted

      It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...