Jump to content
SAU Community

Purchasing A Used Car With Finance On It

Aqua

By Aqua,
in General Automotive Discussion

 Share

Recommended Posts

Aqua Rising Star

Aqua

Posted
Posted

Hi everyone, I am located in Syd and I am about to buy a financed car from QLD

Just two questions for now:

1. Just wanted to know what are the usual or best procedure to purchase a financed car (which hopefully secure both seller/buyer from running away)

2. Whats the best way to deliver the car from QLD to Syd? and which company would you strongly recommend?

Thanks all in advance!

GTR-N1 Grand Master

GTR-N1

Posted
Posted

Things can get really messy if the car is encumbered to two institutions rather than one!

Assuming it's one, you need to gain permission from the seller to contact that institution through a contact person who will also be present on the date of payout and transfer and settlement.

Then you contact that person at that institution to get the final payout figure in writing > scan it > email it to you.

You make out two bank cheques - one equal to the payout figure in the name of the institution - the balance in the name of the seller.

But if you're not going to be present, two EFTs will have to be arranged which is more risky if you don't trust the seller.

Arrange to send the two cheques to the institution in readiness for the date of release/transfer/settlement > then picked up by the transport company of your choice.

Me? I'd fly up there > use two bank cheques > drive the car home!

  • Like 1
Seano350GT Veteran

Seano350GT

Posted
Posted

Do whatever you can to avoid buying an encumbered car at all.. As Terry says, it can get messy.

FYI if it's dealer used car, it is illegal for them to sell you an encumbered vehicle as it must have a clear title.

ras1983 Experienced

ras1983

Posted
Posted

Plenty of encumbered cars are sold by legitimate owners either looking to upgrade or to get rid of the loan, so don't avoid a car just because it is encumbered. What you want to do is suss out the seller. A legitimate seller will organise for you to contact the finance company directly to find out how much is owed and how to pay it off. So ask the seller who the car is financed to, and then start chasing it up yourself. Once you agree on a price with the seller, you pay the finance company the amount owing to it and the balance to the seller, and you get to take home an unencumbered car.

The above is based on my experience. I had a car loan on an XR5 with BankMECU that I sold to a private buyer early last year. I called BankMECU and told them person X was looking to buy the car. I was able to see the balance owed to BankMECU the whole time so I was able to verify when the loan was paid off, and the buyer was talking directly with BankMECU and sent the payment to them, so the buyer was also able to verify when the loan was paid off and the encumbrance removed. He paid me the balance and took the XR5 home.

So in summary ask to speak with the finance company directly and sort it out with them. If the buyer isn't willing to do that then you are better off walking away.

Aqua Rising Star

Aqua

Posted
  • Author
Posted

Thanks for all of the suggestion guys!

I think I have my plan now:
I will fly up there with 2 bank cheques ready, sign the transfer of ownership agreement etc give him the cheque (that goes to him), then attend bank with
him together to deposit the other cheque (that goes to the finance company). After that I will take the car and wait for courier service to deliver it, so I watch the car get loaded onto the courier. Then I fly back to Syd.

That should be the best way?

Cheers guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB20DE NEO smallbox clutch.

      By GTSBoy · Posted

      Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
×
×
  • Create New...