Jump to content
SAU Community

Recommended Posts

Hi guys Im in need of some advise please.Went to start the stagea and the battery was flat so I charged it up and when I went to start it again it idled rough and there was no accelerator.Can some one give me an idea of what to do next as I have check the fuel filter on the pump and its clean.

Thanks

Brett

Link to comment
https://www.sau.com.au/forums/topic/438130-stag-dead-in-the-driveway/
Share on other sites

Your right Scotty , I checked the sock but I don't have a check engine light on.I ran a manual MIL check and ended up with 10 slow flashes followed by 3 sets of quick 10 flashes.The car does start but idles good for 3 seconds than idles roughly for a little while than stops.The throttle butterfly is operating.What does AFM stand for and where is it.

Thanks

Bertt

I unplugged the AFM and the car now revs but a little rough so I am about to order a new Bosch one for $80 dollars but why wasn't the engine light on,

Scotty can supply you an AFM at a better price then that. Pm him.

I unplugged the AFM and the car now revs but a little rough so I am about to order a new Bosch one for $80 dollars but why wasn't the engine light on,

Because the AFM was still outputting a signal, and the ecu though it was fine. They don't all blow in the same way, some fail and you need to unplug them to drive, others you can drive home without unplugging. Most throw the MIL though.

Contact me if you have any dramas, the replacement Nissan AFM's are crap and don't last long. Hopefully the one you got is from somewhere else.

Scotty I tried to PM you but the message is blocked.It looks like my supplier for the AFM cant supply for 3 weeks because of Chinese new year so I was wondering if you can supply me with a AFM.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...