Jump to content
SAU Community

Recommended Posts

Hey Ben, Congrats man thats very nice power !! RB20s still rock ! 12 years on

One suggestion though, turn boost up a little higher say 1.3 - 1.4 bar.

On mine from 1.2 to 1.4bar really starts pulling hard @ 1.4.

cant wait to put the Rb26 cams and pulleys. Gotta do the clutch first tho..

yeah i plan to get it on the dyno again next week before WSID on wed night, I might just do one power run on high boost, but i get a little scared, this is my everyday driver so i need it to run reliably :(

But like i have said before, i need to have a dyno print-out with over 300rwhp and my name on it. just so i can say i have over 300hp

what does everyone else think about running around 1.4 bar? on a stock RB20 with std headgasket? i was considering running the 1.2bar when i race, but for everyday i only run between 0.8 and 1.1bar.

MRK25T you need to let it open up, these turbos are designed to run highish boost to reach their efficiency peak @ 1.3 - 1.4 bar...  

theres a shitload of power to be had from 1.0 - 1.4 bar...

The next owner can boost it more, I couldnt afford a new engine if it blew so got it tuned acordingly. The tuner at Procar did a great job with the car, it is very smooth. Notice how straight he got the AFR.

They are a great turbo, much better than my high flowed standard turbo.

yeah the A/F ratio is awesome on yours! i need to get mine like that.

was it Paul who tuned your car? he was very helpful and knows his stuff, he showed me some stuff on a 900hp NA V8 he recently built! imagine having an NA 900hp engine!

I really need to invest in a PFC! anyone got one cheap for me? hehe

yours will pull some awesome numbers once the boost is in mark.

yeah the A/F ratio is awesome on yours! i need to get mine like that.

was it Paul who tuned your car? he was very helpful and knows his stuff, he showed me some stuff on a 900hp NA V8 he recently built! imagine having an NA 900hp engine!

I really need to invest in a PFC! anyone got one cheap for me? hehe

yours will pull some awesome numbers once the boost is in mark.

No, a specialist tuner came in to do my tuning at Procar.

WHo was the tuner mark? Dont be shy.

Paul from Procar will tell you. He doesnt do any joe shmoe off the street. He tunes the car only if you are sitting in the car with him the whole time and explains everything. I dont know cars, but I did a fair few units of physics in my science degree and it all made sense to me.

The car is no longer mine, sold it this afternoon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...