Jump to content
SAU Community

Recommended Posts

If you read from the beginning of the thread you will come accross the link for autostyle, and there is a pic of a black one there.

I have read from the beginning and those linked are not the full length to the rear window, they are the short ones, which don't look nice IMO.

The only full length ones I have seen the link to were from drive2.ru a Russian website.

Edited by Nzguzzi

Commsman, I prefer the painted look.

Josh, autostyle web site don't have the full length ones. Been through that already.

as started previously eiyher get vinyl and wrap it or paint it. Alot of effort for something that looks like a sore thumb. Each to their own Edited by joshm35
  • Like 1

Nzguzzi, that was my problem as well. I like the full length ones.

The ones I'm modifying should be finished in a couple of weeks. I will post pics once done.

As you said josh....."each to there own". Thats what modifying is all about.

Individual tastes.

Btw its not illegal to cover the top section. As there is no globe in there and no reflector. Reflectors are down the bottom of our tail lights.

There very expensive and only on exchange basis.

^This, I have seen the varieties on IM, some of the light configurations are nice some are not and they all are exchange items.

I'd prefer to do it myself, get to choose how to set up the lights and would be much less expensive than importing!

I'm not a massive fan of LED tail lights or any kind of exterior light as yet, when they make them less directional, brighter or/and with light rods I'll be interested. Otherwise great for interior.

I know they're getting the brightness part sorted, here's a pic of one out of a very large projector (red segment).

2014-04-03130138_zps5569da0e.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...