Jump to content
SAU Community

Wtb M35 Exhaust (Full 3 Inch, Tubo Back) And A Set Of Tail Lights

walkoau

By walkoau,
in Four Door Family & Wagoneers

 Share

Recommended Posts

walkoau Mentor

walkoau

Posted
Posted

Hi Guys,

im after a full 3 inch exhaust to suit my M35 can swap my standard one plus cash your way if your looking to go back to standard.

also after a full set of tail lights including the center brake light at the top. i want to experiment with some LED shapes inside the lights.

Thanks

Justin

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I have the tail lights and stop light, but they are perfect off a low K Axis. I won't be selling them cheap.

You looking for S/H exhausts, or shiny new parts?

walkoau Mentor

walkoau

Posted
  • Author
Posted

hey scotty,

If you Have the axis lights, i assume you have the reverse and the fog? thats what i have on mine but i actually want the 2 reverse lens....out of curiosity how much? sell them separately?

The exhaust, i really dont mind if its second hand or new. Just as long as the condition is good.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

You have the snow pack. Are your wipers heated in the windscreen?

The Axis has the same snow pack, so I think the fog at the back. I will check tomorrow.

PN-Mad Grand Master

PN-Mad

Posted
Posted

not real sure about the wipers, but yeah mine is the axis with all the options except sunroof.

Oh, you got the stagea tent....?

If not, you don't have all the options :P

walkoau Mentor

walkoau

Posted
  • Author
Posted

Oh, you got the stagea tent....?

If not, you don't have all the options :P

that would be a rag top then hey? lol

i will chalk up another post for you guys!

ChrisB Rising Star

ChrisB

Posted
Posted (edited)

Think this post has been hijacked.

Now if I had 2 of those Stagea tents, I could put one on each side....hummm.

Must slow you down a bit though. Car would be inclined to take off like a bird hey....

I wonder if they come in Pink?

output_Y10%20%20001.gif

Edited by ChrisB
walkoau Mentor

walkoau

Posted
  • Author
Posted

Hi Guys,

im after a full 3 inch exhaust to suit my M35 can swap my standard one plus cash your way if your looking to go back to standard.

also after a full set of tail lights including the center brake light at the top. i want to experiment with some LED shapes inside the lights.

Thanks

Justin

Parts still needed! I don't need a bloody tent off the side of the Stagea though.

Are people just trying to get there post numbers up?

PN-Mad Grand Master

PN-Mad

Posted
Posted

There are cars wrecking you can buy lights off.

Exhaust options are everywhere, Scotty, jap systems from cat back, custom items.

You think something is going to land in your lap? Just have a look around. Don't be lazy.

joshm35 Veteran

joshm35

Posted
Posted

No thats just the way this forumn is. Rarely you will get a full system under 1600 unless its a little battered. Brand cat backs go for about 900-1200. www.justjap.com have a blitz cat back for about 1100 or you could source from japan but you will have to search for what you require. Or go to an exhaust shop and get one made. As in dumps you have 2 main options scotty dump (scotty mn35) and am performance (bigkevracing or ebay) hope this helps. Also there is or was a set of lights on ebay aswell not. Happy trails

walkoau Mentor

walkoau

Posted
  • Author
Posted

No thats just the way this forumn is. Rarely you will get a full system under 1600 unless its a little battered. Brand cat backs go for about 900-1200. www.justjap.com have a blitz cat back for about 1100 or you could source from japan but you will have to search for what you require. Or go to an exhaust shop and get one made. As in dumps you have 2 main options scotty dump (scotty mn35) and am performance (bigkevracing or ebay) hope this helps. Also there is or was a set of lights on

ebay aswell not. Happy trails

Thanks for your positive input mate. Wish more people were like you.

As for the lights on eBay, I checked them out, sent an offer of $150 they accepted but then proceeded to tell me they have recently been cracked....

walkoau Mentor

walkoau

Posted
  • Author
Posted

There are cars wrecking you can buy lights off.

Exhaust options are everywhere, Scotty, jap systems from cat back, custom items.

You think something is going to land in your lap? Just have a look around. Don't be lazy.

Wake up to yourself!

Isn't the forums about helping each other out?

I'm not lazy by any standards. I'm just seeing if anyone has second hand items I need. I know what's available new. You don't need to tell me, its common knowledge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...