Jump to content
SAU Community

Recommended Posts

Top Feed 6x Bosch EV14 1200cc Injectors, Flow matched and tested by Five-O Motorsport

Brand new in packets w pigtails and adapters $700 negotiable

Apexi AVC-R Boost Controller

Has a ton of features, one of the best $350 negotiable

S15 Ecu w/Nistune $400 negotiable

Whiteline S13/R31 Front Inner Bushes W51627 $50 negotiable

HKS SSQV II Blow Off Valve $100 negotiable

Zerolift Silvia RB Conversion Brackets

These bolt to your existing SR20 crossmember using sr20 mounts etc... Fits the best in S13/180s.

$100 Negotiable

Have a ton of S15 and R34 Neo Spares all starting around $20+, need to clear my garage

34 GTR Alloy rear knuckles

s15 bmc

Throttle Bodies s15+r34

Intake Manifolds s15+r34

stock BOV +piping r34

Ac Pump

Oil/Water Heater

S15 Engine Loom (few plugs missing)

Tailshaft

Radiator

ABS Diff Sensor

R34 ECU

Neo engine covers

S15 engine member

R34 AFM and pipe

S15 Rear Calipers Need New Seals

S15 & R32 Engine Brackets

+ Lots more Im probably forgetting, chuck me an offer im quite negotiable.

Pics available on request

Located North Shore, Sydney NSW

o4o6o47727

Edited by n_D
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...