Jump to content
SAU Community

Recommended Posts

Its DECA time. And once again i ask for your help

As stated above Saturday 22nd of March

We are after a group of 10 volunteer Officials.

The roles will be for Timers / Starters / Marshals

Most important are the morning events we only need 4 people to help out in the afternoon.

We would need all officials to be at the DECA complex at 8 am and be ready for the officials briefing at 8.45 am.

So if you are not entered and are just coming up for a look we really need your help.

Lunch and drinks will be provided on the day.

So if this sounds like you or you are bringing someone up that can help let me know.

Cheers WayneO

MORNING.

Official 1..Wayne

Official 2..David

Official 3

Official 4,,Anna

Official 5 .Lee

Official 6

Official 7

Official 8

Official 9

Official 10

LUNCH..

AFTERNOON

Official 1..Wayne

Official 2..Tony

Official 3

Official 4

Link to comment
https://www.sau.com.au/forums/topic/439803-deca-volunteers-officials/
Share on other sites

So not needed in the arvo anymore? Will see if I can get the for the morn runs.

Tony

if your not getting up to DECA until lunch time and you can help out in the afternoon only that

would be great . Come find me when you get to DECA.. :thumbsup:

MORNING.

Official 1..Wayne

Official 2..David

Official 3

Official 4,,Anna

Official 5 .Lee

Official 6

Official 7

Official 8

Official 9

Official 10

LUNCH..

AFTERNOON

Official 1..Wayne

Official 2..Tony

Official 3

Official 4

As you can see we are short on volunteers. Not a lot will happen on the day without them.

And the longer it takes for me to find and arrange people on the Saturday morning the

latter we will start.

Just saying.

Tony

if your not getting up to DECA until lunch time and you can help out in the afternoon only that

would be great . Come find me when you get to DECA.. :thumbsup:

Done and done. If I can get there any earlier I will. Where abouts will you be so I can find you a bit easier? Maybe wearing a red hat or such :P

  • Like 1
Done and done. If I can get there any earlier I will. Where abouts will you be so I can find you a bit easier? Maybe wearing a red hat or such :P

He'll have an orange vest on, probably on skid pan shouting but if you see anyone with an orange vest ask them :)

Hi wayne, Im bringing two of my mates along. Im putting there hands up for them for volunteering if you get desperate (looks to be that way)

provided they can still get some passenger runs in i dont see why they cant do it!

...provided they can still get some passenger runs in i dont see why they cant do it!

Help will be most needed during morning session, so passenger runs in the afternoon shouldnt be a problem.

Hi wayne, Im bringing two of my mates along. Im putting there hands up for them for volunteering if you get desperate (looks to be that way)

provided they can still get some passenger runs in i dont see why they cant do it!

That would be great Josh.. i will track them down.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...