Jump to content
SAU Community

Recommended Posts

Thought I'd share this engine with you...

442ci General Motors based OHV V8

- no gaskets, just heat expanding O-rings

- extesive use of titanium.

- fluid dynamic crank to cut through the oil easier at speed

- turbos similar spec to what is found on Indy cars

Capable of 10000RPM (not bad for a 7.2L engine)

Early dyno run @ 25psi

1820Nm @ 7500RPM

2140hp @ 9000RPM

aiming for 2800hp with the boost set at 35psi

just the ticket for getting to work in my R32...

Link to comment
https://www.sau.com.au/forums/topic/44072-who-here-likes-nm/
Share on other sites

timbar32

it says 10,000RPM not 100,000RPM. Its not a turbine....

the type racing this will be used for involves a lot of runs per meet, so it has been engineered to produce this power consistantly with needing a rebuild every run.

Basically nothing in the entire engine is off the shelf. Even the cam is considerably thicker than in the engine its based on. The write up on this suggests rather extreme levels of engineering.

7.2L, 4 turbos & 10,000RPM would sound unbelievable on the track

Link to comment
https://www.sau.com.au/forums/topic/44072-who-here-likes-nm/#findComment-900725
Share on other sites

nah, the guy is fairly tight lipped about many of the exact details. there is just a repeated idea that 'it costs alot to run this sort of gear'. titanium valves, springs & retainers. billet ally/GRP rods, 55mm billet cam, magnesium/thin wall stainless turbos... its insane

i guess 'alot' would be quite an understatement

RB's are nice but i wanna turbo big block!

Link to comment
https://www.sau.com.au/forums/topic/44072-who-here-likes-nm/#findComment-900831
Share on other sites

iv heard about this car

that thing is street legal and competed in all the street legal drags around the states, for a little while but it was banned by all of them soon after haha just too farken quick lol :)

speaking bout big hp some guy accross east, managed to get a Marlin engine (spitfire from WWII) into a car, produces 3000hp. hehe crazy bastard!

Link to comment
https://www.sau.com.au/forums/topic/44072-who-here-likes-nm/#findComment-901001
Share on other sites

the 27L V12 Rolls Royce Merlin was in WW2 fighters such as the Spitfire, Mustang, etc. It was also used in tanks of the era.

Rod Hadfield of the Castlemaine Rod Shop fame has spent the best part of the last couple of decades engineering a Merlin into a '55 Chev body. Apparently it quite the animal. Its appeared on TV since its been finished but I still haven't seen it.

I was 15 last time I saw that car in the museum part of CRS & it was basically just a turret, chassis & engine.

Link to comment
https://www.sau.com.au/forums/topic/44072-who-here-likes-nm/#findComment-901067
Share on other sites

the 27L V12 Rolls Royce Merlin was in WW2 fighters such as the Spitfire, Mustang, etc. It was also used in tanks of the era.

Rod Hadfield of the Castlemaine Rod Shop fame has spent the best part of the last couple of decades engineering a Merlin into a '55 Chev body. Apparently it quite the animal. Its appeared on TV since its been finished but I still haven't seen it.

I was 15 last time I saw that car in the museum part of CRS & it was basically just a turret, chassis & engine.

It was on tv ages ago, can't remember what for but he was having a good talk about it . Was awesome.

Link to comment
https://www.sau.com.au/forums/topic/44072-who-here-likes-nm/#findComment-903737
Share on other sites

Guest INASNT
That's Mike Moran's car + motor there, he's a leading edge drag racer in the states who always seems to be driving customer's cars for them. Then he decided to build a car for himself, and look what he got :D

Yep that car has been in a special zoom magazine drag edition last year!

It was pulling low 6 second 1/4 times in that same shell last year

Link to comment
https://www.sau.com.au/forums/topic/44072-who-here-likes-nm/#findComment-904471
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just a thought, was that car and auto at any point of its life? If so, maybe whoever bridged the inhibitor switch/circuit did a not so good job.
    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
×
×
  • Create New...