Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Autronic you say? Yeah, great support there.

MoTec or at least Power FC please.

I've heard too many horror stories with Wolf now that I am scared. Honestly the amount of RB25's i've heard blowing up with Wolf's alone far exceeds a total of all others. However, the ones that have all gone to my knowledge have been stock injectors pushed too far with pressure regulators etc.

Josh

go a unichip (if they work on ur car that is)

Cheaper then a safc and ebc combo, and unichip controls both ign and fuel, and has a boost controller aswell, like the one i have for sale. Check it out. Id recommend it definately over safc, but if u want to spend more go a full ecu like the wolf.

goodluck

Fane, Can you name any RB25 with forged pistons that has blown up on the Wolf?

I can name a few forged piston engines which have blown up with both PowerFC's and Autronic's on. What does this tell you? Nothing. Engines have there limits, and not all tuners are equal.

WE see as many blowen 25s with PFC and factory ECUs.

Use what ever you want im not bothered but dont expect to beat our guys as Ant and Fabs are moveing the bench mark much higher.

Even GTAAH picked up 70rwhp by replacing his big name ECU with a wolf and The CRED R33 GTS ran well at 400rwhp on a stock RB25 at the drift last weekend. The bigggest drawback with Wolf we cant get enough units to keep up with demand.

You say the old wolf was outdated but forget the old Motecs were screw driver tunable so dont judge the latest units by old models but then again there is some very tough cars out there with V3s.

Basically the long and the short of it is that as long as the tuner is comfortable with the ECU and knows its limitations then there shouldn't be any problems... Every ECU has hidden tid bits that perform certain functions... The other thing to remember with tunable ECU's is that if the customer plays with the settings then its not the tuners or ECUs fault for lunching the engine... But sometimes freak things DO happen and its NO ONES fault...

fane,

to say that because rb25s with wolfs have got belly-up may be true - but I think that you're drawing a long bow to say that the two are a cause and effect.

there is a very good looking morone r32 gtr which spun a bearing some time ago. in a really sad story, it has been rebuilt, was running a pfc, nismo turbos, great fuel pump, and it recently spun the same big end bearing in tune. so what can we infer from this? that the rb26 is a shit engine? (no!) that the skyline is a bad car? (no!) that the power fc is a crap ECU? (nope!).

the simple fact is that mechanical failure is not always a result of the ECU, or the car, or the engine - and so on.

as far as this relates to ECU's, and your questions, the skylines which have shat themselves recently have sometimes had wolfs in. however, they are now more powerful than they were before, are subject to greater loads - often using higher boost and turbos. as paul pointed out, the incidence of ringland failure is more symptomatic of the capacity for the ringlands to sustain 350rwhp than the capacity of the ECU to hold a good, safe tune. notwithstaning this - it may be worth asking what other support upgrades had been included? how many of these cars had baffled surge tanks, oil coolers or improved radiators? how many had headgaskets (debate unto itself) or forged pistons?

the first reality is that the ECU is only as good as the tuner. we're lucky to have someone in WA who is adept at tuning the wolf - and so that's what a lot of people are using. the second is that the engine is only as good as the engine. and a ten year old rb25det is only good for about 300 rwhp reliably and any more will be pushing it.

that's not to say the wolf is categorically the best ECU around, either. it can be argued that the processors on wolf arent as good as some other ecus. just do a search. however, given that we are talking about what are generally street cars, the wolf provides more than enough capacity to provide a good ECU, and has options easily at hand that are not available or not included in the base price of other ecus.

as far as AFC + EBC or full ECU, I cant figure why you would buy two seperate items - that cant talk to each other directly other than via the factory ecu and the engine - when you could have a single unit, and save yourself the spaghetti bullshit for around the same price.

One of the best knowen Blowups in WA was an RB26 with a cost no option build running a Jap remap and tuned but a well knowen jap tuner and the car was making over 100rwhp less than ND4SPD and GTAAH so whats the point in blaming Wolf ECUs? When PPL want to push for high power from stock parts things will fail.

One of the best knowen Blowups in WA was an RB26 with a cost no option build running a Jap remap and tuned but a well knowen jap tuner and the car was making over 100rwhp less than ND4SPD and GTAAH so whats the point in blaming Wolf ECUs? When PPL want to push for high power from stock parts things will fail.

i understand the limits of the rb25/26 and pushing them is usually the reason for them to go keeerrrpow!... and i wasnt blaming wolfs for the deaths either...i was just interested about why the wolf is only so huge in WA.

my guess is that its because we have tuner here that can tune them and no one else really can crazily tune anything else....and with cars like ND4SPD promoting the wolf its hard to say a bad word about them....because 500 ppl come on here and stick up for them because they probably have one :rofl:

merely posing questions not pointing fingers....

Well i just bought a Power Fc, and had of been able to find a tuner in Melb that had installed and tuned one on a car similar to mine which had ran reliably for 6 months, then i would have happily paid the money for the Wolf.

I didnt really want a Pfc, but dont have the garage space or time at the moment to install the Autronic, making a plug in ECU the only choice... Wolf or Power Fc, the Wolf would have even been cheaper.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
×
×
  • Create New...