Jump to content
SAU Community

Recommended Posts

I have a 1990 E-BNR32 here in QLD, every single bit of japanese paperwork about the car before she got on the boat, never been in accident & dead straight chassis, original engine, 129,000kms, original gun grey paint (came with N1 bodykit but had frp bonnet lip and boot lip painted), complete mint interior, brembo swap, complete suspension system overhaul with solid bushes and all adjustable arms (hicas has been replaced with adjustable toe arms), sits on a set of work emotion XT7's and wrapped in AD08'S

While engine is internally stock the car did come from Japan with a few bolt on mods, I've added a few myself and actually have parts to transform it into a 360awkw beast.

I would love to upgrade to a BNR34 and that would be my only reason to sell my car, given my car is pretty much what you're after it seems a good time. if you're interested feel free to contact me and I can give you any info you want, if not good luck with your search :)

I appreciate the reply mate, but at this stage I cant travel to QLD to have a look. If things change I will let you know.

  • 2 weeks later...

Well I can only say that id be willing to fly up from nsw and drive it down to you and then fly home if you pay me and all the airfares and accomodation :yes:

  • 2 weeks later...

I think your budget is also doable, but this could take a little longer to find then your willing to wait

If you really want a gtr that suits you, I'd say you have to be prepared to travel for one

We get people flying in for camrys at work so it's not that hard to do if your looking at spending 30 on a rare car

I can also safely say that I have been keeping an eye on Carsales for the past couple of years and out of a handfull of nice gtr's, only a 1/4 have been in Melbourne

This car has been up for as long as I can remember, it was up for 39990

Just a week or so ago he dropped it to 34990

I'm not sure if he is a member, but if I wanted to spend 30, I would def consider going to see this car, possibly up my budget and try to negotiate a deal with it

From what it seems this thing is an immaculate v spec. Love it

http://www.carsales.com.au/private/details/Nissan-Skyline-1993/SSE-AD-151413/?Cr=0&sdmvc=1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...