Jump to content
SAU Community

Recommended Posts

My car came with one of these when I bought it. Personally, I am not sure how exactly it's wired in, but my mirrors do not automatically fold in when the car is locked - not a massive issue as you can fold the mirrors in manually with a flick of a switch.

Does anyone know if this would be considered an Australian standard of immobilizers? If not, I'd need to change it in order to comply with my insurance too :\

I have one of these also; it was satisfactory for Shannons, but if in doubt, go & see a specialist like Carbon Car Systems. They have products for all budgets, & are absolutely no nonsense.
  • Like 1

or something like the mighty ducks where the car talks..

Viper Alarms have/had a model that did this, a booming voice would advise 'Viper system armed' or 'Step away from the vehicle' only issue is this is very entertaining for kids who would mess with/throw rocks at the car in order to get it to talk :rolleyes:.

I have also been thinking of alarms/immobilisers - sounds like alot of us are!

I rang carbon car systems after reading what members have suggested. I got quoted $520 installed a by a "auto parts store" for a basic sort of system.

Carbon quoted me the exact same system for $375 fitted. Even if i have to put $50 petrol in im still ahead.

Will be getting done by carbon for sure!

  • Like 1

Yep, this thread has inspired me to up the security on the stag. I think i will be contacting carbon very shortly. I'm thinking about getting a two way alarm so i can go kick the persons ass when they touch my car. the just aren't enough laser beams

Also the bonus of a more reliable door lock button is a big bonus. My key button sucks!!

Awesome news that your pride and joy is back. Get that security system fitted asap mate, all black wiring.

If you are feeling keen you can also install a GPS tracking module buried deep under the dash with internal battery backup.

Dont worry alex im sure many bowling clubs nowadays have CCTVs cameras to keep that murano of yours safe. Dont want those bowls hats or your disabled (from the neck up) parking permit to end up in the wrong hands!

God only knows what will happen!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...